HPE JL258A#ABA Aruba 2930F 8 Port PoE+ 2SFP+ network switch
- 10.85
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
C&N
Dual-port 25 GbE OCP 3.0 adapter with Intel E810 controller, PCIe 4.0 x8, SFP28, SR-IOV and RDMA support for Windows Server and Linux
The C&N ST7400-E810 25G is a dual-port network interface card built around the Intel E810 controller and compliant with the OCP 3.0 small form factor specification. It connects through a PCI Express 4.0 x8 bus and provides two SFP28 ports operating at 25 Gb/s, with fallback to 10 Gb/s and 1 Gb/s speeds. The card includes both low-profile and full-height brackets for installation in standard or space-constrained servers.
The Intel E810 controller supports concurrency for 256 non-posted requests, enabling consistent throughput for virtualised workloads such as NFV, storage and HPC-AI. Hardware offloads including TCP/UDP segmentation, SR-IOV with up to 256 virtual functions and 768 virtual station interfaces reduce CPU overhead during prolonged traffic. RDMA over iWARP and RoCE v2 plus DPDK support further accelerate data-path processing under continuous demand.
The PCI Express 4.0 x8 electrical interface caps bidirectional bandwidth at the bus level, so aggregate throughput cannot exceed the lane budget even though each SFP28 port is rated for 25 Gb/s. The adapter remains backward compatible with PCI Express 3.0 slots, but doing so halves the available bus bandwidth and may restrict simultaneous line-rate operation on both ports. Buyers needing more than two 25 Gb/s links or a different form factor must select another adapter.
| Brand | C&N |
|---|---|
| Model | ST7400-E810 25G |
| Part Number | ST7400-E810 25G |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x |
| Speed | 25 gigabits_per_second |
| Interface | PCI-Express |
| Features | Desktop |
The adapter uses the PCI Express 4.0 x8 bus and two SFP28 ports; total power draw depends on the installed optics and server airflow, so consult the Intel E810 datasheet for exact watts.
The card accepts 25GBASE-SR, 25GBASE-LR or 25GBASE-Cu SFP28 modules, plus 10G and 1G equivalents, so have matching transceivers and fibre or copper patch cables ready.
Yes, the PCIe 4.0 x8 interface is backward compatible with PCIe 3.0 slots, and both low-profile and full-height brackets are included for standard or ultra-thin systems.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?