Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

Computer Memory Solutions

Computer Memory Solutions CM256646400DIMMDR 4GB (2 x 2GB) DDR2 800MHz CL6 1.8V 240-Pin DIMM memory upgrade

SKU CH-GQYE-DT2ZS

DDR2 800 MHz dual-channel kit adds 4 GB across two 2 GB unbuffered DIMMs for Intel DG33FB, DG33TL, DG35EC and DG45ID boards

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Timing6-6-6
  • Voltage1.8V
  • 4GB kit upgrades Intel DG33FB, DG33TL, DG35EC, DG45ID motherboards
  • DDR2 800MHz CL6 timing delivers responsive legacy system performance
  • 2 x 2GB unbuffered non-ECC modules install in matched pairs
  • 8V DDR2 240-pin DIMMs match original voltage specification
  • Computer Memory Solutions lifetime warranty backs guaranteed compatibility

System-specific DDR2 upgrade kit

This 4 GB kit contains two 2 GB unbuffered DDR2-800 modules built to the PC2-6400 standard with CL6 timings and 1.8 V operation. The 240-pin DIMMs use major-brand chips in a 2Rx8 configuration and are validated for Intel DG33FB, DG33TL, DG35EC and DG45ID motherboards. No heat spreaders are fitted.

Suited for legacy Intel desktop repairs

The kit matches the exact density, voltage and timing required by the four listed Intel boards, making it a direct drop-in for restoring or maxing out those systems. Builders working on platforms that need registered or ECC memory, or boards that only accept a different DDR generation, should select another part.

240-pin DDR2 form factor decides fit

Only motherboards with DDR2 240-pin slots that support PC2-6400 at 1.8 V can use these modules; the physical keying and signalling prevent installation in any other memory generation.

Istaknuto

  • 4GB kit upgrades Intel DG33FB, DG33TL, DG35EC, DG45ID motherboards
  • DDR2 800MHz CL6 timing delivers responsive legacy system performance
  • 2 x 2GB unbuffered non-ECC modules install in matched pairs
  • 8V DDR2 240-pin DIMMs match original voltage specification
  • Computer Memory Solutions lifetime warranty backs guaranteed compatibility

Specifikacije

BrandComputer Memory Solutions
ModelCM256646400DIMMDR
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Timing6-6-6
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel Dg33Fb, Dg33Tl, Dg35Ec, Dg45Id Motherboard
Package Content2 Memory RAM Sticks

Pitanja o ovom artiklu

Will this 240-pin DDR2 kit work in a board that currently uses 240-pin DDR2 modules?

Yes, the kit uses the same 240-pin DDR2 form factor, so it fits the same slots as your existing DDR2 memory.

Can I add this 4 GB kit to the Intel DG33FB alongside the original memory?

The DG33FB has four slots and supports up to 8 GB total, so adding this 4 GB kit leaves room for the original modules if they are also DDR2 800.

How can I confirm the system sees the full 4 GB at 800 MHz after install?

Enter the BIOS or use a tool like CPU-Z; it should show 4 GB total and a DRAM frequency of 400 MHz (DDR2 800).

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.