Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR2 DIMM modules with black chips and gold contacts

Computer Memory Solutions

Computer Memory Solutions CM256646400DIMMDR 4GB (2 x 2GB) DDR2 800MHz CL6 1.8V 240-Pin DIMM memory upgrade

SKU CH-GQYE-DT2ZS

DDR2 800 MHz dual-channel kit adds 4 GB across two 2 GB unbuffered DIMMs for Intel DG33FB, DG33TL, DG35EC and DG45ID boards

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Timing6-6-6
  • Voltage1.8V
  • 4GB kit upgrades Intel DG33FB, DG33TL, DG35EC, DG45ID motherboards
  • DDR2 800MHz CL6 timing delivers responsive legacy system performance
  • 2 x 2GB unbuffered non-ECC modules install in matched pairs
  • 8V DDR2 240-pin DIMMs match original voltage specification
  • Computer Memory Solutions lifetime warranty backs guaranteed compatibility

System-specific DDR2 upgrade kit

This 4 GB kit contains two 2 GB unbuffered DDR2-800 modules built to the PC2-6400 standard with CL6 timings and 1.8 V operation. The 240-pin DIMMs use major-brand chips in a 2Rx8 configuration and are validated for Intel DG33FB, DG33TL, DG35EC and DG45ID motherboards. No heat spreaders are fitted.

Suited for legacy Intel desktop repairs

The kit matches the exact density, voltage and timing required by the four listed Intel boards, making it a direct drop-in for restoring or maxing out those systems. Builders working on platforms that need registered or ECC memory, or boards that only accept a different DDR generation, should select another part.

240-pin DDR2 form factor decides fit

Only motherboards with DDR2 240-pin slots that support PC2-6400 at 1.8 V can use these modules; the physical keying and signalling prevent installation in any other memory generation.

Pluspunten

  • 4GB kit upgrades Intel DG33FB, DG33TL, DG35EC, DG45ID motherboards
  • DDR2 800MHz CL6 timing delivers responsive legacy system performance
  • 2 x 2GB unbuffered non-ECC modules install in matched pairs
  • 8V DDR2 240-pin DIMMs match original voltage specification
  • Computer Memory Solutions lifetime warranty backs guaranteed compatibility

Specificaties

BrandComputer Memory Solutions
ModelCM256646400DIMMDR
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Timing6-6-6
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel Dg33Fb, Dg33Tl, Dg35Ec, Dg45Id Motherboard
Package Content2 Memory RAM Sticks

Vragen over dit artikel

Will this 240-pin DDR2 kit work in a board that currently uses 240-pin DDR2 modules?

Yes, the kit uses the same 240-pin DDR2 form factor, so it fits the same slots as your existing DDR2 memory.

Can I add this 4 GB kit to the Intel DG33FB alongside the original memory?

The DG33FB has four slots and supports up to 8 GB total, so adding this 4 GB kit leaves room for the original modules if they are also DDR2 800.

How can I confirm the system sees the full 4 GB at 800 MHz after install?

Enter the BIOS or use a tool like CPU-Z; it should show 4 GB total and a DRAM frequency of 400 MHz (DDR2 800).

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.