Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Bare 3.5 inch SAS hard drive, silver aluminium casing, circuit board visible underneath

DELL

DELL 400-ANVM 10TB 3.5" SAS 7200 RPM 12Gb/s internal hard drive

SKU CH-TVHC-YY9AP

A 10 TB 3.5 inch enterprise hard drive with a SAS 12Gb/s interface, 7200 RPM speed and a 128 MB buffer

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Average Latency3Gb/s
  • UsageFor Enterprise Storage
  • 10 TB capacity stores large data volumes
  • 12 Gb/s SAS interface enables fast data transfers
  • 7200 RPM spindle speed provides quick disk access
  • 128 MB buffer supports sustained performance
  • 5 inch form factor fits standard enterprise bays

Dell 10TB 3.5" SAS Enterprise Drive

This Dell 400-ANVM is a 3.5-inch internal hard drive built for enterprise storage arrays. It provides 10TB of capacity on a Near Line SAS interface rated at 12Gb/s. The drive spins at 7200 RPM and uses a 512e disk format with a 128MB buffer. It is supplied as a bare drive with hot-plug capability.

Suited for capacity-focused servers and arrays

The drive fits servers and storage systems that accept 3.5-inch hot-plug SAS drives and need large sequential throughput. It is not for buyers who require 2.5-inch form factors or 10K RPM spindle speeds. It is also not for environments limited to the older 3Gb/s SAS standard. VMware users should note that 512e drives are not supported on that platform.

The 512e format decides OS compatibility

The single specification that determines fit is the 512e sector format. Operating systems must support this emulation mode; Windows Server 2008 R2 or later and supported Linux kernels are required. Older operating systems or hypervisors that lack 512e support will not recognise the volume.

Istaknuto

  • 10 TB capacity stores large data volumes
  • 12 Gb/s SAS interface enables fast data transfers
  • 7200 RPM spindle speed provides quick disk access
  • 128 MB buffer supports sustained performance
  • 5 inch form factor fits standard enterprise bays

Specifikacije

BrandDell
Model400-ANVM
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity10TB
RPM7200 RPM
Average Latency3Gb/s
UsageFor Enterprise Storage
Form Factor3.5"

Pitanja o ovom artiklu

Should I pick the 10 TB 3.5" model or the 1.2 TB 2.5" alternative?

Choose the 10 TB 3.5" drive when you need maximum capacity for enterprise storage arrays. The 1.2 TB 2.5" unit runs at 10K RPM for higher IOPS but stores far less data.

What does the 7200 RPM spindle speed deliver in a live server?

The 7200 RPM rotation provides fast sequential throughput for bulk data workloads such as backup, archiving and media repositories, while the 128 MB buffer smooths burst transfers.

The drive lists a 12 Gb/s SAS interface — what does that cap in practice?

The Near Line SAS 12 Gb/s link sets the peak host transfer ceiling; sustained rates will be lower and limited by the 7200 RPM mechanics and the 512e format.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.