DELL
DELL 400-ANVM 10TB 3.5" SAS 7200 RPM 12Gb/s internal hard drive
A 10 TB 3.5 inch enterprise hard drive with a SAS 12Gb/s interface, 7200 RPM speed and a 128 MB buffer
- PackagingBare Drive
- InterfaceSAS 3Gb/s
- Capacity10TB
- RPM7200 RPM
- Average Latency3Gb/s
- UsageFor Enterprise Storage
- 10 TB capacity stores large data volumes
- 12 Gb/s SAS interface enables fast data transfers
- 7200 RPM spindle speed provides quick disk access
- 128 MB buffer supports sustained performance
- 5 inch form factor fits standard enterprise bays
Dell 10TB 3.5" SAS Enterprise Drive
This Dell 400-ANVM is a 3.5-inch internal hard drive built for enterprise storage arrays. It provides 10TB of capacity on a Near Line SAS interface rated at 12Gb/s. The drive spins at 7200 RPM and uses a 512e disk format with a 128MB buffer. It is supplied as a bare drive with hot-plug capability.
Suited for capacity-focused servers and arrays
The drive fits servers and storage systems that accept 3.5-inch hot-plug SAS drives and need large sequential throughput. It is not for buyers who require 2.5-inch form factors or 10K RPM spindle speeds. It is also not for environments limited to the older 3Gb/s SAS standard. VMware users should note that 512e drives are not supported on that platform.
The 512e format decides OS compatibility
The single specification that determines fit is the 512e sector format. Operating systems must support this emulation mode; Windows Server 2008 R2 or later and supported Linux kernels are required. Older operating systems or hypervisors that lack 512e support will not recognise the volume.
Pluspunten
- 10 TB capacity stores large data volumes
- 12 Gb/s SAS interface enables fast data transfers
- 7200 RPM spindle speed provides quick disk access
- 128 MB buffer supports sustained performance
- 5 inch form factor fits standard enterprise bays
Specificaties
| Brand | Dell |
|---|---|
| Model | 400-ANVM |
| Packaging | Bare Drive |
| Interface | SAS 3Gb/s |
| Capacity | 10TB |
| RPM | 7200 RPM |
| Average Latency | 3Gb/s |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
Vragen over dit artikel
Should I pick the 10 TB 3.5" model or the 1.2 TB 2.5" alternative?
Choose the 10 TB 3.5" drive when you need maximum capacity for enterprise storage arrays. The 1.2 TB 2.5" unit runs at 10K RPM for higher IOPS but stores far less data.
What does the 7200 RPM spindle speed deliver in a live server?
The 7200 RPM rotation provides fast sequential throughput for bulk data workloads such as backup, archiving and media repositories, while the 128 MB buffer smooths burst transfers.
The drive lists a 12 Gb/s SAS interface — what does that cap in practice?
The Near Line SAS 12 Gb/s link sets the peak host transfer ceiling; sustained rates will be lower and limited by the 7200 RPM mechanics and the 512e format.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
