Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Fanttik S1 Pro cordless electric screwdriver with 16 bits in magnetic aluminium case

Fanttik S1 Pro Electric Screwdriver 16 Bits 220 RPM 8 N·m 2000 mAh

SKU CH-SAPR-TBHC7

Cordless electric screwdriver with 16 S2 steel bits, 220 RPM motor, 8 N·m manual torque, and 2000 mAh battery rated for 340 screws per charge

  • Size/Dimensions6
  • Voltage3.7 volts_of_direct_current
  • CordlessBattery Powered
  • Type1 x Cordless Electric Screwdriver
  • Amps7.4 watt_hours, 3.7 volts_of_direct_current
  • Chuck Type1 x Cordless Electric Screwdriver
  • 16 S2 steel bits cover five fastener types
  • 220 RPM motor with three torque presets up to 4.2 N·m
  • 8 N·m manual torque for stubborn joints
  • 2000 mAh battery drives 340 screws per charge
  • Magnetic aluminium case keeps bits and driver organised

Compact cordless screwdriver with 16 bits

The Fanttik S1 Pro is a battery-powered electric screwdriver designed for light assembly and repair work. It ships with 16 coated S2 hardened-steel bits held in a magnetic aluminium case. The tool suits desktop-computer builds, small-appliance fixes and furniture assembly where a compact driver is preferred over a full-size drill.

Thermals noise and power draw

A 3.7 V lithium-ion cell rated at 2000 mAh (7.4 Wh) powers the 220 RPM motor. In typical use the driver runs cool and quiet, drawing only the energy needed for the selected torque setting. The supplier rates a full charge at 340 screws (3.5 × 20 mm), so intermittent tasks rarely require mid-job recharging.

Sustained load behaviour

Three electronic torque settings — 1.5, 3 and 4.2 N·m — plus an 8 N·m manual override let the user match resistance to the fastener. Under continuous driving the motor maintains the chosen setting without thermal throttling, and the magnetic bit holder and chuck keep bits seated during repeated cycles. Not suited for high-torque construction work or jobs needing impact action.

Istaknuto

  • 16 S2 steel bits cover five fastener types
  • 220 RPM motor with three torque presets up to 4.2 N·m
  • 8 N·m manual torque for stubborn joints
  • 2000 mAh battery drives 340 screws per charge
  • Magnetic aluminium case keeps bits and driver organised

Specifikacije

BrandFanttik
Size/Dimensions6
Voltage3.7 volts_of_direct_current
CordlessBattery Powered
Type1 x Cordless Electric Screwdriver
Amps7.4 watt_hours, 3.7 volts_of_direct_current
Chuck Type1 x Cordless Electric Screwdriver
Chuck Size16 pcs 1/4''Hex Screwdriver Bits
Maximum Speed220 rpm
Batteries IncludedTrue
Battery TypeLithium Ion
Variable Speed220 rpm
Blows per Minute220 rpm
Horsepower7.4 watt_hours
Weight845 grams
Gear Train220 rpm
Torque8 newton_meters
Collation TypeAluminum
Cord LengthBattery Powered
FeaturesFurniture Install, PC Repair
Commercial/ResidentialFurniture Install, PC Repair
Part NumberNEX S1 Pro

Pitanja o ovom artiklu

How do I fit a bit into the 1/4'' hex chuck and what is the common mistake?

Pull the chuck sleeve back, insert the 1/4'' hex bit until it clicks, then release; the mistake is not pulling the sleeve far enough so the bit sits loose.

What will need replacing after heavy use on this screwdriver?

The 16 S2 hardened-steel bits wear first; the 2000 mAh lithium-ion cell is sealed and not user-replaceable.

At what point does the tool stop driving under continuous load?

The motor delivers up to 8 N·m manual torque; the electronic clutch disengages at the selected setting — 1.5, 3 or 4.2 N·m — so that limit appears first.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.