Eddeas Stainless Steel Kitchen Tongs 3PCS 7 9 12 Inch 600°F
- Ergonomic, Tongs Fo…
- 8
21,99 US$
0.00027069BTC
I lager
Fanttik S1 Pro Electric Screwdriver 16 Bits 220 RPM 8 N·m 2000 mAh
Cordless electric screwdriver with 16 S2 steel bits, 220 RPM motor, 8 N·m manual torque, and 2000 mAh battery rated for 340 screws per charge
- Size/Dimensions6
- Voltage3.7 volts_of_direct_current
- CordlessBattery Powered
- Type1 x Cordless Electric Screwdriver
- Amps7.4 watt_hours, 3.7 volts_of_direct_current
- Chuck Type1 x Cordless Electric Screwdriver
- 16 S2 steel bits cover five fastener types
- 220 RPM motor with three torque presets up to 4.2 N·m
- 8 N·m manual torque for stubborn joints
- 2000 mAh battery drives 340 screws per charge
- Magnetic aluminium case keeps bits and driver organised
Compact cordless screwdriver with 16 bits
The Fanttik S1 Pro is a battery-powered electric screwdriver designed for light assembly and repair work. It ships with 16 coated S2 hardened-steel bits held in a magnetic aluminium case. The tool suits desktop-computer builds, small-appliance fixes and furniture assembly where a compact driver is preferred over a full-size drill.
Thermals noise and power draw
A 3.7 V lithium-ion cell rated at 2000 mAh (7.4 Wh) powers the 220 RPM motor. In typical use the driver runs cool and quiet, drawing only the energy needed for the selected torque setting. The supplier rates a full charge at 340 screws (3.5 × 20 mm), so intermittent tasks rarely require mid-job recharging.
Sustained load behaviour
Three electronic torque settings — 1.5, 3 and 4.2 N·m — plus an 8 N·m manual override let the user match resistance to the fastener. Under continuous driving the motor maintains the chosen setting without thermal throttling, and the magnetic bit holder and chuck keep bits seated during repeated cycles. Not suited for high-torque construction work or jobs needing impact action.
I korthet
- 16 S2 steel bits cover five fastener types
- 220 RPM motor with three torque presets up to 4.2 N·m
- 8 N·m manual torque for stubborn joints
- 2000 mAh battery drives 340 screws per charge
- Magnetic aluminium case keeps bits and driver organised
Specifikationer
| Brand | Fanttik |
|---|---|
| Size/Dimensions | 6 |
| Voltage | 3.7 volts_of_direct_current |
| Cordless | Battery Powered |
| Type | 1 x Cordless Electric Screwdriver |
| Amps | 7.4 watt_hours, 3.7 volts_of_direct_current |
| Chuck Type | 1 x Cordless Electric Screwdriver |
| Chuck Size | 16 pcs 1/4''Hex Screwdriver Bits |
| Maximum Speed | 220 rpm |
| Batteries Included | True |
| Battery Type | Lithium Ion |
| Variable Speed | 220 rpm |
| Blows per Minute | 220 rpm |
| Horsepower | 7.4 watt_hours |
| Weight | 845 grams |
| Gear Train | 220 rpm |
| Torque | 8 newton_meters |
| Collation Type | Aluminum |
| Cord Length | Battery Powered |
| Features | Furniture Install, PC Repair |
| Commercial/Residential | Furniture Install, PC Repair |
| Part Number | NEX S1 Pro |
Frågor om den här produkten
How do I fit a bit into the 1/4'' hex chuck and what is the common mistake?
Pull the chuck sleeve back, insert the 1/4'' hex bit until it clicks, then release; the mistake is not pulling the sleeve far enough so the bit sits loose.
What will need replacing after heavy use on this screwdriver?
The 16 S2 hardened-steel bits wear first; the 2000 mAh lithium-ion cell is sealed and not user-replaceable.
At what point does the tool stop driving under continuous load?
The motor delivers up to 8 N·m manual torque; the electronic clutch disengages at the selected setting — 1.5, 3 or 4.2 N·m — so that limit appears first.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
HE-SANQI HEQGJ1217 12" & 17" Stainless Steel Tongs
- Ergonomic, HEQGJ1217
- 6
13,99 US$
0.00017221BTC
I lager
