Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two white low-profile DDR5 memory modules with aluminum heatspreaders

G.SKILL

G.SKILL F5-5600J4040C16GX2-RS5W 32GB DDR5 desktop RAM

SKU CH-T2M7-5DP8V MPN F5-5600J4040C16GX2-RS5W

A 32GB dual-channel DDR5 kit running at 5600 with CL40 timings and a low-profile 33mm white heat spreader for compact builds

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600
  • CAS LatencyCL40
  • Timing40-40-40-89
  • Voltage1.20V
  • ECCNo

Capacity 32GB (2 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL40

Color White

  • Dual-channel 32 GB kit for multitasking headroom
  • DDR5 5600 speed for responsive performance
  • CL40 40-40-40-89 timings tuned for stability
  • 20 V operation keeps power draw low
  • 33 mm low-profile heatspreader fits large CPU coolers

Ripjaws S5 32GB DDR5 5600 Kit

This Ripjaws S5 kit delivers 32GB of DDR5 desktop memory as a matched pair of 16GB modules. It targets DIY builders and PC enthusiasts who want a white heat-spreader aesthetic and validated stability. The kit runs at DDR5 5600 with CL40 latency and 1.20V operation. Intel XMP 3.0 profiles are included for one-click configuration.

Sustained Load Behaviour

Hand-screened ICs and G.SKILL validation testing aim to keep performance consistent during extended workloads rather than only in short bursts. The aluminium heatspreader dissipates heat from the memory chips to help maintain the rated 40-40-40-89 timings under load. At the default 1.20V the kit is designed to run within standard thermal limits for typical desktop use. No ECC or registered buffering is present, so error correction relies on the platform.

Low-Profile Installation Notes

Each module measures 33mm tall, clearing most large CPU coolers in compact builds. The dual-channel kit installs in the standard two-slot configuration for Intel 600 Series platforms. The system will boot at SPD speeds until the XMP 3.0 profile is enabled in BIOS. Mixing with other modules is not validated; using the paired sticks together gives the tested timing and stability.

Istaknuto

  • Dual-channel 32 GB kit for multitasking headroom
  • DDR5 5600 speed for responsive performance
  • CL40 40-40-40-89 timings tuned for stability
  • 20 V operation keeps power draw low
  • 33 mm low-profile heatspreader fits large CPU coolers

Specifikacije

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-5600J4040C16GX2-RS5W
Capacity32GB (2 x 16GB)
SpeedDDR5 5600
CAS LatencyCL40
Timing40-40-40-89
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorWhite
Heat SpreaderYes
FeaturesPerformance DDR5 memory designed for DIY and PC enthusiasts.
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard & CPU.
Improper usage may damage system hardware co
Recommend UseIntel 600 Series
LED ColorNone
Težina pošiljke0.11 kg
Dimenzije pakiranja218 × 142 × 16 mm

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How much heat does the 33mm Ripjaws S5 heatspreader add to a system running all day?

The low-profile aluminium heatspreader dissipates heat from the hand-screened ICs at the rated 1.20V without active cooling, keeping temperatures stable during continuous operation.

What motherboard feature must I already have to run this kit at DDR5 5600?

An Intel 600-series motherboard with an XMP 3.0-capable BIOS is required; the kit boots at SPD speed until the XMP 3.0 profile is enabled.

Will the 33mm height clear the large tower cooler I already own?

At 33mm tall the modules fit most large air coolers, but you should verify your specific cooler's stated memory clearance before installing.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.