G.SKILL F5-5200J4040A16GX2-RS5K 32GB (2 x 16GB) DDR5 5200 desktop RAM
- 32GB (2 x 16GB)
- DDR5 5200
G.SKILL
A 32GB dual-channel DDR5 kit running at 5600 with CL40 timings and a low-profile 33mm white heat spreader for compact builds
Capacity 32GB (2 x 16GB)
Speed DDR5 5600 (PC5 44800)
This Ripjaws S5 kit delivers 32GB of DDR5 desktop memory as a matched pair of 16GB modules. It targets DIY builders and PC enthusiasts who want a white heat-spreader aesthetic and validated stability. The kit runs at DDR5 5600 with CL40 latency and 1.20V operation. Intel XMP 3.0 profiles are included for one-click configuration.
Hand-screened ICs and G.SKILL validation testing aim to keep performance consistent during extended workloads rather than only in short bursts. The aluminium heatspreader dissipates heat from the memory chips to help maintain the rated 40-40-40-89 timings under load. At the default 1.20V the kit is designed to run within standard thermal limits for typical desktop use. No ECC or registered buffering is present, so error correction relies on the platform.
Each module measures 33mm tall, clearing most large CPU coolers in compact builds. The dual-channel kit installs in the standard two-slot configuration for Intel 600 Series platforms. The system will boot at SPD speeds until the XMP 3.0 profile is enabled in BIOS. Mixing with other modules is not validated; using the paired sticks together gives the tested timing and stability.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-5600J4040C16GX2-RS5W |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 |
| CAS Latency | CL40 |
| Timing | 40-40-40-89 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | White |
| Heat Spreader | Yes |
| Features | Performance DDR5 memory designed for DIY and PC enthusiasts. Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard & CPU. Improper usage may damage system hardware co |
| Recommend Use | Intel 600 Series |
| LED Color | None |
| 배송 무게 | 0.11 kg |
| 포장 크기 | 218 × 142 × 16 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The low-profile aluminium heatspreader dissipates heat from the hand-screened ICs at the rated 1.20V without active cooling, keeping temperatures stable during continuous operation.
An Intel 600-series motherboard with an XMP 3.0-capable BIOS is required; the kit boots at SPD speed until the XMP 3.0 profile is enabled.
At 33mm tall the modules fit most large air coolers, but you should verify your specific cooler's stated memory clearance before installing.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?