저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two black DDR5 memory modules with low-profile matte heatspreaders

G.SKILL

G.SKILL F5-5600J4040C16GX2-RS5K 32GB DDR5 desktop RAM

SKU CH-B5GN-2Z5TS MPN F5-5600J4040C16GX2-RS5K

A 32GB dual-channel DDR5 kit running at 5600 with CL40 timing and a 33mm low-profile heat spreader

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600
  • CAS LatencyCL40
  • Timing40-40-40-89
  • Voltage1.20V
  • ECCNo

Capacity 32GB (2 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL40

Color Black

  • DDR5 5600 speed enables faster data throughput
  • CL40 latency with 40-40-40-89 timings supports responsive operation
  • Dual-channel 32 GB kit (2 x 16 GB) doubles memory bandwidth
  • Low-profile 33 mm height fits compact builds and large coolers
  • Intel XMP 3.0 profile simplifies one-click overclocking on 600 series platforms

Ripjaws S5 DDR5 5600 kit for Intel 600 Series

This 32GB kit contains two 16GB unbuffered DIMMs rated at DDR5 5600 with CL40 timings. It is built for DIY builders and PC enthusiasts who want a validated dual-channel upgrade for Intel 600 Series platforms.

33mm low-profile heatspreader in matte black

The aluminium heatspreader stands only 33mm tall, leaving room for large CPU coolers in compact builds. Each module uses hand-screened ICs that have passed G.SKILL validation, and the kit runs at 1.20V without ECC or registered buffering.

Intel XMP 3.0 profile for one-click tuning

Enable the XMP 3.0 profile in BIOS to load the rated 40-40-40-89 timings automatically; at default settings the kit boots at SPD speed. The design earned a Red Dot Design Award in 2022 and includes no LED lighting.

주요 특징

  • DDR5 5600 speed enables faster data throughput
  • CL40 latency with 40-40-40-89 timings supports responsive operation
  • Dual-channel 32 GB kit (2 x 16 GB) doubles memory bandwidth
  • Low-profile 33 mm height fits compact builds and large coolers
  • Intel XMP 3.0 profile simplifies one-click overclocking on 600 series platforms

사양

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-5600J4040C16GX2-RS5K
Capacity32GB (2 x 16GB)
SpeedDDR5 5600
CAS LatencyCL40
Timing40-40-40-89
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseIntel 600 Series
LED ColorNone
배송 무게0.11 kg
포장 크기216 × 142 × 16 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What speed and latency does the DDR5 5600 XMP 3.0 profile set on this kit?

The XMP 3.0 profile configures the modules to run at DDR5 5600 with timings of 40-40-40-89 at 1.20V.

Will the 33mm low-profile heatspreader clear a large tower CPU cooler?

At 33mm tall the Ripjaws S5 modules fit under most large air coolers, but verify your cooler's specified RAM clearance before buying.

How do I enable the rated 5600 speed on an Intel 600 series board?

Enter the BIOS, load the Intel XMP 3.0 profile for this kit, save and reboot; the memory will then run at DDR5 5600 CL40 instead of the default SPD speed.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.