Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two black DDR5 memory modules with low-profile matte heatspreaders

G.SKILL

G.SKILL F5-5600J4040C16GX2-RS5K 32GB DDR5 desktop RAM

SKU CH-B5GN-2Z5TS MPN F5-5600J4040C16GX2-RS5K

A 32GB dual-channel DDR5 kit running at 5600 with CL40 timing and a 33mm low-profile heat spreader

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600
  • CAS LatencyCL40
  • Timing40-40-40-89
  • Voltage1.20V
  • ECCNo

Capacity 32GB (2 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL40

Color Black

  • DDR5 5600 speed enables faster data throughput
  • CL40 latency with 40-40-40-89 timings supports responsive operation
  • Dual-channel 32 GB kit (2 x 16 GB) doubles memory bandwidth
  • Low-profile 33 mm height fits compact builds and large coolers
  • Intel XMP 3.0 profile simplifies one-click overclocking on 600 series platforms

Ripjaws S5 DDR5 5600 kit for Intel 600 Series

This 32GB kit contains two 16GB unbuffered DIMMs rated at DDR5 5600 with CL40 timings. It is built for DIY builders and PC enthusiasts who want a validated dual-channel upgrade for Intel 600 Series platforms.

33mm low-profile heatspreader in matte black

The aluminium heatspreader stands only 33mm tall, leaving room for large CPU coolers in compact builds. Each module uses hand-screened ICs that have passed G.SKILL validation, and the kit runs at 1.20V without ECC or registered buffering.

Intel XMP 3.0 profile for one-click tuning

Enable the XMP 3.0 profile in BIOS to load the rated 40-40-40-89 timings automatically; at default settings the kit boots at SPD speed. The design earned a Red Dot Design Award in 2022 and includes no LED lighting.

Helstu kostir

  • DDR5 5600 speed enables faster data throughput
  • CL40 latency with 40-40-40-89 timings supports responsive operation
  • Dual-channel 32 GB kit (2 x 16 GB) doubles memory bandwidth
  • Low-profile 33 mm height fits compact builds and large coolers
  • Intel XMP 3.0 profile simplifies one-click overclocking on 600 series platforms

Tæknilýsing

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-5600J4040C16GX2-RS5K
Capacity32GB (2 x 16GB)
SpeedDDR5 5600
CAS LatencyCL40
Timing40-40-40-89
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseIntel 600 Series
LED ColorNone
Sendingarþyngd0.11 kg
Stærð sendingar216 × 142 × 16 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What speed and latency does the DDR5 5600 XMP 3.0 profile set on this kit?

The XMP 3.0 profile configures the modules to run at DDR5 5600 with timings of 40-40-40-89 at 1.20V.

Will the 33mm low-profile heatspreader clear a large tower CPU cooler?

At 33mm tall the Ripjaws S5 modules fit under most large air coolers, but verify your cooler's specified RAM clearance before buying.

How do I enable the rated 5600 speed on an Intel 600 series board?

Enter the BIOS, load the Intel XMP 3.0 profile for this kit, save and reboot; the memory will then run at DDR5 5600 CL40 instead of the default SPD speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.