G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 5600 CL30 desktop RAM F5-5600J3036D16GX2-RS5K
- 32GB (2 x 16GB)
- 288-Pin PC RAM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
G.SKILL
A 32GB dual-channel DDR5 kit running at 5600 with CL40 timing and a 33mm low-profile heat spreader
Capacity 32GB (2 x 16GB)
Speed DDR5 5600 (PC5 44800)
This 32GB kit contains two 16GB unbuffered DIMMs rated at DDR5 5600 with CL40 timings. It is built for DIY builders and PC enthusiasts who want a validated dual-channel upgrade for Intel 600 Series platforms.
The aluminium heatspreader stands only 33mm tall, leaving room for large CPU coolers in compact builds. Each module uses hand-screened ICs that have passed G.SKILL validation, and the kit runs at 1.20V without ECC or registered buffering.
Enable the XMP 3.0 profile in BIOS to load the rated 40-40-40-89 timings automatically; at default settings the kit boots at SPD speed. The design earned a Red Dot Design Award in 2022 and includes no LED lighting.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-5600J4040C16GX2-RS5K |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 |
| CAS Latency | CL40 |
| Timing | 40-40-40-89 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 600 Series |
| LED Color | None |
| وزن الشحنة | 0.11 kg |
| أبعاد الطرد | 216 × 142 × 16 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The XMP 3.0 profile configures the modules to run at DDR5 5600 with timings of 40-40-40-89 at 1.20V.
At 33mm tall the Ripjaws S5 modules fit under most large air coolers, but verify your cooler's specified RAM clearance before buying.
Enter the BIOS, load the Intel XMP 3.0 profile for this kit, save and reboot; the memory will then run at DDR5 5600 CL40 instead of the default SPD speed.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟