G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 6000 CL30 desktop RAM F5-6000J3040F16GX2-RS5W
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
G.SKILL
96GB dual-channel DDR5 kit at 5600 MT/s with CL40 timings and a 33mm low-profile heat spreader
Capacity 96GB (2 x 48GB)
Speed DDR5 5600 (PC5 44800)
This 96GB kit contains two 48GB DDR5 modules built for desktop systems. Hand-screened ICs and a 33mm low-profile heat spreader suit compact builds and large CPU coolers. The matte black finish matches a wide range of PC themes. It is a dual-channel kit validated for stability and compatibility.
The modules run at DDR5 5600 with a CAS latency of 40 and timings of 40-40-40-89 at 1.25V. This speed is the rated specification; the kit will boot at the default SPD speed when BIOS settings are left unchanged. XMP 3.0 support allows the rated profile to be loaded with a single BIOS setting.
The kit is recommended for Intel 700 series platforms. Verify that your motherboard supports 48GB per DIMM and dual-channel operation at this capacity. Confirm the CPU cooler specification for 33mm module clearance. Ensure the BIOS is updated to enable XMP 3.0 profiles.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-5600J4040D48GX2-RS5K |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Timing | 40-40-40-89 |
| Voltage | 1.25V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 700 series |
| LED Color | None |
| Sendingarþyngd | 0.18 kg |
| Stærð sendingar | 160 × 137 × 15 mm |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The 96GB 2×48GB dual-channel kit matches Intel 700 series platforms and keeps both channels populated for maximum throughput.
The kit runs at 5600 MT/s with CL40 40-40-40-89 timings at 1.25V, giving 44800 MB/s peak bandwidth when XMP 3.0 is enabled.
The 288-pin DDR5 bus caps transfer rate at 5600 MT/s, so the 44800 MB/s theoretical ceiling is the practical maximum for this kit.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?