G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 6000 CL30 desktop RAM F5-6000J3040F16GX2-RS5W
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
G.SKILL
96GB dual-channel DDR5 kit at 5600 MT/s with CL40 timings and a 33mm low-profile heat spreader
Capacity 96GB (2 x 48GB)
Speed DDR5 5600 (PC5 44800)
This 96GB kit contains two 48GB DDR5 modules built for desktop systems. Hand-screened ICs and a 33mm low-profile heat spreader suit compact builds and large CPU coolers. The matte black finish matches a wide range of PC themes. It is a dual-channel kit validated for stability and compatibility.
The modules run at DDR5 5600 with a CAS latency of 40 and timings of 40-40-40-89 at 1.25V. This speed is the rated specification; the kit will boot at the default SPD speed when BIOS settings are left unchanged. XMP 3.0 support allows the rated profile to be loaded with a single BIOS setting.
The kit is recommended for Intel 700 series platforms. Verify that your motherboard supports 48GB per DIMM and dual-channel operation at this capacity. Confirm the CPU cooler specification for 33mm module clearance. Ensure the BIOS is updated to enable XMP 3.0 profiles.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-5600J4040D48GX2-RS5K |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Timing | 40-40-40-89 |
| Voltage | 1.25V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 700 series |
| LED Color | None |
| Тегло на пратката | 0.18 kg |
| Размери на опаковката | 160 × 137 × 15 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The 96GB 2×48GB dual-channel kit matches Intel 700 series platforms and keeps both channels populated for maximum throughput.
The kit runs at 5600 MT/s with CL40 40-40-40-89 timings at 1.25V, giving 44800 MB/s peak bandwidth when XMP 3.0 is enabled.
The 288-pin DDR5 bus caps transfer rate at 5600 MT/s, so the 44800 MB/s theoretical ceiling is the practical maximum for this kit.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?