暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two matte black low-profile DDR5 modules, 33mm tall, no LEDs

G.SKILL

G.SKILL F5-5600J4040D48GX2-RS5K 96GB (2×48GB) DDR5 5600 desktop RAM

SKU CH-6ZVV-NPZTR MPN F5-5600J4040D48GX2-RS5K

96GB dual-channel DDR5 kit at 5600 MT/s with CL40 timings and a 33mm low-profile heat spreader

  • Capacity96GB (2 x 48GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL40
  • Timing40-40-40-89
  • Voltage1.25V

Capacity 96GB (2 x 48GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL40

Color Black

  • 96 GB capacity for heavy multitasking with two 48 GB modules
  • DDR5 5600 speed delivers high bandwidth at PC5 44800
  • CL40 40-40-40-89 timings tuned for responsive performance
  • 33 mm low-profile heatspreader clears large CPU coolers
  • Intel XMP 3.0 profile enables one-click overclocking on 700 series platforms

Ripjaws S5 96GB DDR5 Kit

This 96GB kit contains two 48GB DDR5 modules built for desktop systems. Hand-screened ICs and a 33mm low-profile heat spreader suit compact builds and large CPU coolers. The matte black finish matches a wide range of PC themes. It is a dual-channel kit validated for stability and compatibility.

DDR5 5600 CL40 Timing Limits

The modules run at DDR5 5600 with a CAS latency of 40 and timings of 40-40-40-89 at 1.25V. This speed is the rated specification; the kit will boot at the default SPD speed when BIOS settings are left unchanged. XMP 3.0 support allows the rated profile to be loaded with a single BIOS setting.

Compatibility Checks Before Ordering

The kit is recommended for Intel 700 series platforms. Verify that your motherboard supports 48GB per DIMM and dual-channel operation at this capacity. Confirm the CPU cooler specification for 33mm module clearance. Ensure the BIOS is updated to enable XMP 3.0 profiles.

特長

  • 96 GB capacity for heavy multitasking with two 48 GB modules
  • DDR5 5600 speed delivers high bandwidth at PC5 44800
  • CL40 40-40-40-89 timings tuned for responsive performance
  • 33 mm low-profile heatspreader clears large CPU coolers
  • Intel XMP 3.0 profile enables one-click overclocking on 700 series platforms

仕様

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-5600J4040D48GX2-RS5K
Capacity96GB (2 x 48GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL40
Timing40-40-40-89
Voltage1.25V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseIntel 700 series
LED ColorNone
配送重量0.18 kg
梱包サイズ160 × 137 × 15 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I pick the 96GB 2×48GB kit or a different capacity for my build?

The 96GB 2×48GB dual-channel kit matches Intel 700 series platforms and keeps both channels populated for maximum throughput.

What does the DDR5 5600 speed deliver once the modules are installed?

The kit runs at 5600 MT/s with CL40 40-40-40-89 timings at 1.25V, giving 44800 MB/s peak bandwidth when XMP 3.0 is enabled.

How does the 288-pin DDR5 interface limit real-world performance?

The 288-pin DDR5 bus caps transfer rate at 5600 MT/s, so the 44800 MB/s theoretical ceiling is the practical maximum for this kit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。