G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 6000 CL30 desktop RAM F5-6000J3040F16GX2-RS5W
- 32GB (2 x 16GB)
- 288-Pin PC RAM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
G.SKILL
96GB dual-channel DDR5 kit at 5600 MT/s with CL40 timings and a 33mm low-profile heat spreader
Capacity 96GB (2 x 48GB)
Speed DDR5 5600 (PC5 44800)
This 96GB kit contains two 48GB DDR5 modules built for desktop systems. Hand-screened ICs and a 33mm low-profile heat spreader suit compact builds and large CPU coolers. The matte black finish matches a wide range of PC themes. It is a dual-channel kit validated for stability and compatibility.
The modules run at DDR5 5600 with a CAS latency of 40 and timings of 40-40-40-89 at 1.25V. This speed is the rated specification; the kit will boot at the default SPD speed when BIOS settings are left unchanged. XMP 3.0 support allows the rated profile to be loaded with a single BIOS setting.
The kit is recommended for Intel 700 series platforms. Verify that your motherboard supports 48GB per DIMM and dual-channel operation at this capacity. Confirm the CPU cooler specification for 33mm module clearance. Ensure the BIOS is updated to enable XMP 3.0 profiles.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-5600J4040D48GX2-RS5K |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Timing | 40-40-40-89 |
| Voltage | 1.25V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 700 series |
| LED Color | None |
| น้ำหนักในการจัดส่ง | 0.18 kg |
| ขนาดบรรจุภัณฑ์ | 160 × 137 × 15 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The 96GB 2×48GB dual-channel kit matches Intel 700 series platforms and keeps both channels populated for maximum throughput.
The kit runs at 5600 MT/s with CL40 40-40-40-89 timings at 1.25V, giving 44800 MB/s peak bandwidth when XMP 3.0 is enabled.
The 288-pin DDR5 bus caps transfer rate at 5600 MT/s, so the 44800 MB/s theoretical ceiling is the practical maximum for this kit.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม