G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 6000 CL30 desktop RAM F5-6000J3040F16GX2-RS5W
- 32GB (2 x 16GB)
- 288-Pin PC RAM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
G.SKILL
A 64GB dual-channel DDR5 kit with 6400 speed, CL32 timing and 33mm low-profile heatspreaders
Capacity 64GB (2 x 32GB)
Speed DDR5 6400 (PC5 51200)
This Ripjaws S5 kit delivers 64GB of DDR5 memory in a dual-channel 2 x 32GB configuration. It is built for DIY builders and PC enthusiasts who need high-speed desktop memory. The modules use hand-screened ICs validated for stability and compatibility. A matte black aluminium heatspreader keeps the memory running cool.
The 33mm module height fits compact chassis and clears large CPU coolers without interference. Intel XMP 3.0 support lets the kit load its rated profile from the BIOS with a single setting. At default BIOS settings the memory boots at standard SPD speed. The Red Dot Design Award 2022 recognises the minimalist racing-stripe aesthetic.
The kit runs at DDR5 6400 (PC5 51200) with timings of 32-39-39-102 and a CAS latency of CL32. Operation at the rated speed requires 1.40V, so the motherboard and CPU must support that voltage. Verify platform capability before purchase to ensure the memory reaches its specified performance.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-6400J3239G32GX2-RS5K |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 700 Series |
| น้ำหนักในการจัดส่ง | 0.12 kg |
| ขนาดบรรจุภัณฑ์ | 218 × 142 × 15 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The aluminum heatspreader is a passive component with no moving parts or thermal paste, so it does not require any maintenance or replacement during the life of the modules.
The first limit is the 1.40V operating voltage; the modules are validated to run continuously at this level with the XMP 3.0 profile active.
The passive 33mm heatspreaders dissipate heat silently with zero noise, and power draw stays at the specified 1.40V level during continuous operation.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม