G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 6000 CL30 desktop RAM F5-6000J3040F16GX2-RS5W
- 32GB (2 x 16GB)
- 288-Pin PC RAM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
G.SKILL
A 64GB dual-channel DDR5 kit with 6400 speed, CL32 timing and 33mm low-profile heatspreaders
Capacity 64GB (2 x 32GB)
Speed DDR5 6400 (PC5 51200)
This Ripjaws S5 kit delivers 64GB of DDR5 memory in a dual-channel 2 x 32GB configuration. It is built for DIY builders and PC enthusiasts who need high-speed desktop memory. The modules use hand-screened ICs validated for stability and compatibility. A matte black aluminium heatspreader keeps the memory running cool.
The 33mm module height fits compact chassis and clears large CPU coolers without interference. Intel XMP 3.0 support lets the kit load its rated profile from the BIOS with a single setting. At default BIOS settings the memory boots at standard SPD speed. The Red Dot Design Award 2022 recognises the minimalist racing-stripe aesthetic.
The kit runs at DDR5 6400 (PC5 51200) with timings of 32-39-39-102 and a CAS latency of CL32. Operation at the rated speed requires 1.40V, so the motherboard and CPU must support that voltage. Verify platform capability before purchase to ensure the memory reaches its specified performance.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-6400J3239G32GX2-RS5K |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 700 Series |
| משקל משלוח | 0.12 kg |
| מידות האריזה | 218 × 142 × 15 mm |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The aluminum heatspreader is a passive component with no moving parts or thermal paste, so it does not require any maintenance or replacement during the life of the modules.
The first limit is the 1.40V operating voltage; the modules are validated to run continuously at this level with the XMP 3.0 profile active.
The passive 33mm heatspreaders dissipate heat silently with zero noise, and power draw stays at the specified 1.40V level during continuous operation.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?