Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two matte black DDR5 sticks with low profile heat spreaders, 33mm tall

G.SKILL

G.SKILL Flare X5 F5-5600J3636D32GX2-FX5 64GB (2 x 32GB) DDR5 5600 desktop RAM

SKU CH-GGWM-9VP6H MPN F5-5600J3636D32GX2-FX5

Dual-channel 64 GB DDR5 kit runs at 5600 MT/s with CL36 timings at 1.25 V, includes AMD EXPO and Intel XMP 3.0 profiles, and fits under large coolers with a 33 mm low-profile heat spreader

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-36-36-89
  • Voltage1.25V

Capacity 64GB (2 x 32GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL36

  • 64 GB dual-channel kit scales multitasking and gaming
  • DDR5 5600 speed delivers 44800 MT/s bandwidth
  • CL36 36-36-36-89 timing reduces latency
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers

Flare X5 64 GB DDR5 5600 kit

This 64 GB kit contains two 32 GB DDR5 5600 modules rated at CL36-36-36-89 and 1.25 V. They are built on hand-screened ICs and carry both AMD EXPO and Intel XMP 3.0 profiles for one-step overclocking on supported platforms. A 33 mm low-profile heat spreader in matte black keeps clearance tight for large CPU coolers. The dual-channel kit is validated for AMD 600 series chipsets.

Who this suits and who should look elsewhere

Builders targeting AMD 600 series motherboards who want plug-and-play EXPO performance at DDR5 5600 will find this kit straightforward. Systems needing ECC, lower latency than CL36, higher speeds than 5600 MT/s, or capacities beyond 64 GB should consider other kits. The 1.25 V operating voltage also fits standard DDR5 power envelopes.

Key spec: DDR5 5600 CL36 at 1.25 V

The decisive figure is the rated speed of DDR5 5600 (PC5 44800) with timings of 36-36-36-89 at 1.25 V. If your motherboard and CPU support this EXPO profile, the kit will run at its advertised specification without manual tuning.

Istaknuto

  • 64 GB dual-channel kit scales multitasking and gaming
  • DDR5 5600 speed delivers 44800 MT/s bandwidth
  • CL36 36-36-36-89 timing reduces latency
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers

Specifikacije

BrandG.SKILL
SeriesFlare X5
ModelF5-5600J3636D32GX2-FX5
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-36-36-89
Voltage1.25V
ECCNo
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileAMD EXPO / Intel XMP 3.0 / Intel XMP 3.0 and AMD EXPO
ColorBlack
Heat SpreaderYes
FeaturesExtreme performance DDR5 memory designed for gaming and PC enthusiasts
AMD EXPO Support
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with AMD EXPO, enable AMD EXPO profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated AMD EXPO overclock speed and system stabilit
Recommend UseAMD 600 Series Chipset
LED ColorNone
Težina pošiljke0.14 kg
Dimenzije pakiranja218 × 142 × 16 mm

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does my motherboard need an AMD 600 Series Chipset for the Flare X5 DDR5 5600 kit to run at its rated speed?

The kit is validated for AMD 600 Series Chipset platforms and carries AMD EXPO profiles; enabling EXPO in the BIOS sets the memory to DDR5 5600 with CL36 timings at 1.25V.

Will this 288-pin dual-channel kit work alongside my existing DDR5 modules if I keep them installed?

G.SKILL advises against mixing memory kits; the Flare X5 modules are sold as a matched 2 x 32 GB set tested to run together at 36-36-36-89 timings.

How can I confirm the kit is operating at the advertised DDR5 5600 speed after I enable the profile?

Enter the BIOS or use a system-information utility and verify the memory reports 5600 MT/s, CL36 latency, 1.25 V and the 36-36-36-89 timing set.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.