Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two matte black DDR5 sticks with low profile heat spreaders, 33mm tall

G.SKILL

G.SKILL Flare X5 F5-5600J3636D32GX2-FX5 64GB (2 x 32GB) DDR5 5600 desktop RAM

SKU CH-GGWM-9VP6H MPN F5-5600J3636D32GX2-FX5

Dual-channel 64 GB DDR5 kit runs at 5600 MT/s with CL36 timings at 1.25 V, includes AMD EXPO and Intel XMP 3.0 profiles, and fits under large coolers with a 33 mm low-profile heat spreader

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-36-36-89
  • Voltage1.25V

Capacity 64GB (2 x 32GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL36

  • 64 GB dual-channel kit scales multitasking and gaming
  • DDR5 5600 speed delivers 44800 MT/s bandwidth
  • CL36 36-36-36-89 timing reduces latency
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers

Flare X5 64 GB DDR5 5600 kit

This 64 GB kit contains two 32 GB DDR5 5600 modules rated at CL36-36-36-89 and 1.25 V. They are built on hand-screened ICs and carry both AMD EXPO and Intel XMP 3.0 profiles for one-step overclocking on supported platforms. A 33 mm low-profile heat spreader in matte black keeps clearance tight for large CPU coolers. The dual-channel kit is validated for AMD 600 series chipsets.

Who this suits and who should look elsewhere

Builders targeting AMD 600 series motherboards who want plug-and-play EXPO performance at DDR5 5600 will find this kit straightforward. Systems needing ECC, lower latency than CL36, higher speeds than 5600 MT/s, or capacities beyond 64 GB should consider other kits. The 1.25 V operating voltage also fits standard DDR5 power envelopes.

Key spec: DDR5 5600 CL36 at 1.25 V

The decisive figure is the rated speed of DDR5 5600 (PC5 44800) with timings of 36-36-36-89 at 1.25 V. If your motherboard and CPU support this EXPO profile, the kit will run at its advertised specification without manual tuning.

Pluspunten

  • 64 GB dual-channel kit scales multitasking and gaming
  • DDR5 5600 speed delivers 44800 MT/s bandwidth
  • CL36 36-36-36-89 timing reduces latency
  • 25 V operation keeps power draw low
  • 33 mm low-profile height clears large CPU coolers

Specificaties

BrandG.SKILL
SeriesFlare X5
ModelF5-5600J3636D32GX2-FX5
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-36-36-89
Voltage1.25V
ECCNo
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileAMD EXPO / Intel XMP 3.0 / Intel XMP 3.0 and AMD EXPO
ColorBlack
Heat SpreaderYes
FeaturesExtreme performance DDR5 memory designed for gaming and PC enthusiasts
AMD EXPO Support
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with AMD EXPO, enable AMD EXPO profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated AMD EXPO overclock speed and system stabilit
Recommend UseAMD 600 Series Chipset
LED ColorNone
Verzendgewicht0.14 kg
Pakketafmetingen218 × 142 × 16 mm

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does my motherboard need an AMD 600 Series Chipset for the Flare X5 DDR5 5600 kit to run at its rated speed?

The kit is validated for AMD 600 Series Chipset platforms and carries AMD EXPO profiles; enabling EXPO in the BIOS sets the memory to DDR5 5600 with CL36 timings at 1.25V.

Will this 288-pin dual-channel kit work alongside my existing DDR5 modules if I keep them installed?

G.SKILL advises against mixing memory kits; the Flare X5 modules are sold as a matched 2 x 32 GB set tested to run together at 36-36-36-89 timings.

How can I confirm the kit is operating at the advertised DDR5 5600 speed after I enable the profile?

Enter the BIOS or use a system-information utility and verify the memory reports 5600 MT/s, CL36 latency, 1.25 V and the 36-36-36-89 timing set.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.