Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular ATX power supply, matte metal finish, single fan, reduced depth

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite HPE-552kr M9000Z M9080N

SKU CH-3247-HTXYY

ATX power supply replaces legacy units in select HP Pavilion Elite models with reduced depth, dual-voltage input, over-current protection and 24-pin, 4-pin, SATA, LP4 and floppy connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for HP Pavilion Elite HPE-552kr M9000Z M9080N
  • Dual voltage input 115 / 230 V works worldwide
  • Reduced depth 5.9" x 3.4" fits tight cases
  • Over current and over power protection safeguards components
  • Connectors include 24-pin ATX, 4-pin P4, three SATA, two LP4, one floppy

HP Pavilion Elite replacement power supply

This Gulfe ATX unit is built as a direct replacement for HP Pavilion Elite HPE-552kr, M9000Z and M9080N systems. It fits the original mounting points and reduced-depth chassis without modification. The supply is new and rated at 2.5 kg. It is not for builders who need a different form factor or higher wattage than the original design.

Over-current and over-power protection included

The unit ships with a 24-pin ATX connector, one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector. Input voltage covers 115 V and 230 V at 47 to 63 Hz. Hold-up time is 17 ms minimum and rise time is less than 70 ms. No modular cables or additional adapters are provided.

Reduced-depth ATX form factor with single fan

Dimensions are 5.9 inches in height and 3.4 inches in width, matching the 5.86 by 3.3 inch specification for tighter cases. A single fan handles cooling. Output rails deliver +5 V, -5 V, +12 V1, +12 V2, +3.3 V, -12 V and +5 V standby. The supply is not for systems requiring a larger footprint or redundant cooling.

Istaknuto

  • Direct replacement for HP Pavilion Elite HPE-552kr M9000Z M9080N
  • Dual voltage input 115 / 230 V works worldwide
  • Reduced depth 5.9" x 3.4" fits tight cases
  • Over current and over power protection safeguards components
  • Connectors include 24-pin ATX, 4-pin P4, three SATA, two LP4, one floppy

Specifikacije

BrandGulfe
TypeATX
Fans1
Weight2.5

Pitanja o ovom artiklu

How often should the internal fan be cleaned to maintain airflow?

The unit uses a single fan for cooling; periodic dust removal with compressed air keeps airflow steady and prevents overheating.

What protection activates first if the +12 V rails draw too much current under sustained load?

Over Current Protection on the +12 V1 and +12 V2 rails trips before the overall Over Power Protection threshold is reached.

How much heat and noise should I expect when the supply runs continuously at typical load?

High-efficiency design and low ripple reduce waste heat; the single fan runs quietly while maintaining safe temperatures during all-day operation.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.