Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite HPE-552kr M9000Z M9080N

SKU CH-3247-HTXYY

ATX power supply replaces legacy units in select HP Pavilion Elite models with reduced depth, dual-voltage input, over-current protection and 24-pin, 4-pin, SATA, LP4 and floppy connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for HP Pavilion Elite HPE-552kr M9000Z M9080N
  • Dual voltage input 115 / 230 V works worldwide
  • Reduced depth 5.9" x 3.4" fits tight cases
  • Over current and over power protection safeguards components
  • Connectors include 24-pin ATX, 4-pin P4, three SATA, two LP4, one floppy

HP Pavilion Elite replacement power supply

This Gulfe ATX unit is built as a direct replacement for HP Pavilion Elite HPE-552kr, M9000Z and M9080N systems. It fits the original mounting points and reduced-depth chassis without modification. The supply is new and rated at 2.5 kg. It is not for builders who need a different form factor or higher wattage than the original design.

Over-current and over-power protection included

The unit ships with a 24-pin ATX connector, one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector. Input voltage covers 115 V and 230 V at 47 to 63 Hz. Hold-up time is 17 ms minimum and rise time is less than 70 ms. No modular cables or additional adapters are provided.

Reduced-depth ATX form factor with single fan

Dimensions are 5.9 inches in height and 3.4 inches in width, matching the 5.86 by 3.3 inch specification for tighter cases. A single fan handles cooling. Output rails deliver +5 V, -5 V, +12 V1, +12 V2, +3.3 V, -12 V and +5 V standby. The supply is not for systems requiring a larger footprint or redundant cooling.

Prednosti

  • Direct replacement for HP Pavilion Elite HPE-552kr M9000Z M9080N
  • Dual voltage input 115 / 230 V works worldwide
  • Reduced depth 5.9" x 3.4" fits tight cases
  • Over current and over power protection safeguards components
  • Connectors include 24-pin ATX, 4-pin P4, three SATA, two LP4, one floppy

Špecifikácie

BrandGulfe
TypeATX
Fans1
Weight2.5

Otázky k tomuto produktu

How often should the internal fan be cleaned to maintain airflow?

The unit uses a single fan for cooling; periodic dust removal with compressed air keeps airflow steady and prevents overheating.

What protection activates first if the +12 V rails draw too much current under sustained load?

Over Current Protection on the +12 V1 and +12 V2 rails trips before the overall Over Power Protection threshold is reached.

How much heat and noise should I expect when the supply runs continuously at typical load?

High-efficiency design and low ripple reduce waste heat; the single fan runs quietly while maintaining safe temperatures during all-day operation.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.