Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular silver ATX power supply unit with single fan and multiple cable connectors

Gulfe

Gulfe ATX power supply for HP Pavilion Elite HPE H8-1070T

SKU CH-EV2W-PRJM5

ATX power supply replaces legacy HP units with reduced depth, dual-voltage input, over-current protection and SATA connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces several older legacy power supplies
  • ATX reduced depth design fits tight cases at 5.9 inch height
  • Dual voltage input 115 / 230 V for worldwide use
  • Over current and over power protection built in
  • 24 pin ATX plus P4 4 pin SATA and LP4 connectors included

Replacement PSU for HP Pavilion Elite HPE H8-1070T

This new Gulfe ATX unit is built as a direct replacement for the HP Pavilion Elite HPE H8-1070T. It supplies +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails through a 24-pin ATX connector, a 4-pin P4-12V connector, three SATA connectors, three LP4 connectors and one floppy connector.

Upgrade from failed or ageing original unit

The reduced-depth chassis measures 5.86 inches by 3.3 inches, fitting the original mounting space without modification. It accepts 115 or 230 V input at 47 to 63 Hz and includes over-current and over-power protection. Hold-up time is rated at 17 ms minimum and rise time is less than 70 ms.

Verify connector needs and physical clearance

Confirm that your motherboard requires the 24-pin ATX and 4-pin P4-12V connectors listed. Check that three SATA power leads and three LP4 leads match your drive count. Ensure the 5.9-inch height and 3.4-inch width clear any nearby cables or brackets in your case.

Istaknuto

  • Replaces several older legacy power supplies
  • ATX reduced depth design fits tight cases at 5.9 inch height
  • Dual voltage input 115 / 230 V for worldwide use
  • Over current and over power protection built in
  • 24 pin ATX plus P4 4 pin SATA and LP4 connectors included

Specifikacije

BrandGulfe
TypeATX
Fans1
Weight2.5

Pitanja o ovom artiklu

What are the exact dimensions of this ATX power supply?

The unit measures 5.86 inches by 3.3 inches with a reduced depth of 5.9 inches height and 3.4 inches width for increased compatibility.

Which connectors must be attached during installation, and which one is often missed?

Connect the 24-pin ATX, 4-pin P4-12V, three SATA, three LP4 and one floppy connector; the 4-pin P4-12V near the CPU socket is the step most often missed.

When should the internal fan be cleaned to maintain airflow?

Clean the single fan intake every six to twelve months using compressed air to prevent dust build-up that reduces cooling efficiency.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.