Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Rectangular silver ATX power supply unit with single fan and multiple cable connectors

Gulfe

Gulfe ATX power supply for HP Pavilion Elite HPE H8-1070T

SKU CH-EV2W-PRJM5

ATX power supply replaces legacy HP units with reduced depth, dual-voltage input, over-current protection and SATA connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces several older legacy power supplies
  • ATX reduced depth design fits tight cases at 5.9 inch height
  • Dual voltage input 115 / 230 V for worldwide use
  • Over current and over power protection built in
  • 24 pin ATX plus P4 4 pin SATA and LP4 connectors included

Replacement PSU for HP Pavilion Elite HPE H8-1070T

This new Gulfe ATX unit is built as a direct replacement for the HP Pavilion Elite HPE H8-1070T. It supplies +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails through a 24-pin ATX connector, a 4-pin P4-12V connector, three SATA connectors, three LP4 connectors and one floppy connector.

Upgrade from failed or ageing original unit

The reduced-depth chassis measures 5.86 inches by 3.3 inches, fitting the original mounting space without modification. It accepts 115 or 230 V input at 47 to 63 Hz and includes over-current and over-power protection. Hold-up time is rated at 17 ms minimum and rise time is less than 70 ms.

Verify connector needs and physical clearance

Confirm that your motherboard requires the 24-pin ATX and 4-pin P4-12V connectors listed. Check that three SATA power leads and three LP4 leads match your drive count. Ensure the 5.9-inch height and 3.4-inch width clear any nearby cables or brackets in your case.

Fordele

  • Replaces several older legacy power supplies
  • ATX reduced depth design fits tight cases at 5.9 inch height
  • Dual voltage input 115 / 230 V for worldwide use
  • Over current and over power protection built in
  • 24 pin ATX plus P4 4 pin SATA and LP4 connectors included

Specifikationer

BrandGulfe
TypeATX
Fans1
Weight2.5

Spørgsmål om denne vare

What are the exact dimensions of this ATX power supply?

The unit measures 5.86 inches by 3.3 inches with a reduced depth of 5.9 inches height and 3.4 inches width for increased compatibility.

Which connectors must be attached during installation, and which one is often missed?

Connect the 24-pin ATX, 4-pin P4-12V, three SATA, three LP4 and one floppy connector; the 4-pin P4-12V near the CPU socket is the step most often missed.

When should the internal fan be cleaned to maintain airflow?

Clean the single fan intake every six to twelve months using compressed air to prevent dust build-up that reduces cooling efficiency.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.