Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Silver 3.5 inch bare hard drive with circuit board visible

HP

HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-KYKQ-A6WS7 MPN 628059-B21

3.5-inch SATA hard drive with 3TB capacity and 7200 RPM spindle speed for desktop or server storage

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Seek Time8.5ms
  • Average Latency3Gb/s
  • 3 TB capacity stores large datasets
  • 7200 RPM spindle speed speeds up data access
  • SATA 3.0Gb/s interface connects to standard controllers
  • 5-inch form factor fits desktop and server bays
  • 5 ms average seek time reduces read latency

HP 3 TB SATA Hard Drive

This HP 628059-B21 provides three terabytes of storage on a 3.5 inch SATA 3.0Gb/s interface spinning at 7200 RPM. It is built for entry servers and external storage arrays that need high capacity at a low cost per gigabyte. The drive suits workloads of 40 percent or less in non-mission critical environments. Buyers who need faster random access or heavier sustained write loads should consider other solutions.

Bare Drive Midline Build

The unit ships as a bare drive with a 3.5 inch Midline form factor intended for hot swap bays in compatible chassis. Standard SATA data and power connectors allow direct installation in servers or external enclosures without adapters. Average seek time is 8.5ms and average latency is rated at 3Gb/s. Systems that require 2.5 inch drives or a different mounting style cannot use this unit.

Thermals and Power Profile

Spindle speed of 7200 RPM produces typical mechanical drive heat and audible noise levels for a 3.5 inch Midline device. Power draw follows standard SATA 3.0Gb/s specifications for this capacity class. The drive is rated for continuous operation in entry server environments with low duty cycles. Installations without adequate airflow or vibration damping may experience higher temperatures.

Istaknuto

  • 3 TB capacity stores large datasets
  • 7200 RPM spindle speed speeds up data access
  • SATA 3.0Gb/s interface connects to standard controllers
  • 5-inch form factor fits desktop and server bays
  • 5 ms average seek time reduces read latency

Specifikacije

BrandHP
Model628059-B21
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity3TB
RPM7200 RPM
Average Seek Time8.5ms
Average Latency3Gb/s
UsageIdeal for Servers
Form Factor3.5"
Težina pošiljke1.11 kg
Dimenzije pakiranja295 × 229 × 221 mm

Pitanja o ovom artiklu

What transfer limit does the SATA 3.0Gb/s interface impose on this 3TB 7200 RPM drive?

The SATA 3.0Gb/s link tops out at 3.0 Gb/s, so sustained throughput cannot exceed that signalling rate.

Which drive bay and mounting pattern does the 3.5-inch form factor require?

A standard 3.5-inch bay with the industry screw-hole spacing is needed; the bare drive has no tray or caddy included.

What is the correct jumper or BIOS step when installing this bare SATA drive?

No jumpers are required; ensure the motherboard SATA port is enabled in BIOS and the drive is recognised before formatting.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.