Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver 3.5 inch bare hard drive with circuit board visible

HP

HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-KYKQ-A6WS7 MPN 628059-B21

3.5-inch SATA hard drive with 3TB capacity and 7200 RPM spindle speed for desktop or server storage

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Seek Time8.5ms
  • Average Latency3Gb/s
  • 3 TB capacity stores large datasets
  • 7200 RPM spindle speed speeds up data access
  • SATA 3.0Gb/s interface connects to standard controllers
  • 5-inch form factor fits desktop and server bays
  • 5 ms average seek time reduces read latency

HP 3 TB SATA Hard Drive

This HP 628059-B21 provides three terabytes of storage on a 3.5 inch SATA 3.0Gb/s interface spinning at 7200 RPM. It is built for entry servers and external storage arrays that need high capacity at a low cost per gigabyte. The drive suits workloads of 40 percent or less in non-mission critical environments. Buyers who need faster random access or heavier sustained write loads should consider other solutions.

Bare Drive Midline Build

The unit ships as a bare drive with a 3.5 inch Midline form factor intended for hot swap bays in compatible chassis. Standard SATA data and power connectors allow direct installation in servers or external enclosures without adapters. Average seek time is 8.5ms and average latency is rated at 3Gb/s. Systems that require 2.5 inch drives or a different mounting style cannot use this unit.

Thermals and Power Profile

Spindle speed of 7200 RPM produces typical mechanical drive heat and audible noise levels for a 3.5 inch Midline device. Power draw follows standard SATA 3.0Gb/s specifications for this capacity class. The drive is rated for continuous operation in entry server environments with low duty cycles. Installations without adequate airflow or vibration damping may experience higher temperatures.

Punti di forza

  • 3 TB capacity stores large datasets
  • 7200 RPM spindle speed speeds up data access
  • SATA 3.0Gb/s interface connects to standard controllers
  • 5-inch form factor fits desktop and server bays
  • 5 ms average seek time reduces read latency

Caratteristiche tecniche

BrandHP
Model628059-B21
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity3TB
RPM7200 RPM
Average Seek Time8.5ms
Average Latency3Gb/s
UsageIdeal for Servers
Form Factor3.5"
Peso di spedizione1.11 kg
Dimensioni del pacco295 × 229 × 221 mm

Domande su questo articolo

What transfer limit does the SATA 3.0Gb/s interface impose on this 3TB 7200 RPM drive?

The SATA 3.0Gb/s link tops out at 3.0 Gb/s, so sustained throughput cannot exceed that signalling rate.

Which drive bay and mounting pattern does the 3.5-inch form factor require?

A standard 3.5-inch bay with the industry screw-hole spacing is needed; the bare drive has no tray or caddy included.

What is the correct jumper or BIOS step when installing this bare SATA drive?

No jumpers are required; ensure the motherboard SATA port is enabled in BIOS and the drive is recognised before formatting.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.