BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
HPE
A 12-core Xeon processor upgrade running at 2.50 GHz with 30 MB L3 cache, compatible with HP ProLiant DL380 Generation9 servers
This refurbished HPE processor upgrade adds a 12-core Intel Xeon E5-2680 v3 running at 2.50 GHz with a 3.30 GHz turbo frequency. It targets administrators refreshing compatible Generation9 servers to handle virtualised workloads and private cloud tasks. The 22 nm chip delivers 30 MB of L3 cache and 9.60 GT/s QuickPath Interconnect for multi-socket scaling.
The processor fits the LGA 2011-v3 socket and carries a 120 W TDP with a maximum case temperature of 84.5 °C. Its 2.1 by 1.8 inch footprint matches the existing heatsink mounting pattern on supported ProLiant DL380 Generation9 boards. No additional power connectors are required beyond the standard socket supply.
The part is validated for the HP ProLiant DL380 Generation9 platform, ensuring firmware recognition and thermal profiling without extra configuration. Buyers needing support for newer server generations or different socket types will not be served by this upgrade. The package contains the processor only; no heatsink or installation hardware is included.
| Brand | HPE |
|---|---|
| Type | Processor Upgrade |
| Težina pošiljke | 0.91 kg |
| Dimenzije pakiranja | 127 × 127 × 51 mm |
The 9.60 GT/s QuickPath Interconnect caps the data rate between two E5-2680 v3 CPUs, so memory and cache coherency traffic cannot exceed that bandwidth.
The processor fits Socket LGA 2011-v3 and needs a heatsink that covers the 2.1 by 1.8 inch package within the server chassis.
Align the notches, seat the CPU in the LGA 2011-v3 socket, close the load plate, then apply thermal paste before mounting the heatsink — skipping the paste causes overheating.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?