Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Silver 2.5-inch SAS hard drive with green circuit board visible

HPE

HPE 870765-B21 900 GB 15000 rpm 2.5" SAS 12Gb/s internal hard drive

SKU CH-5GGW-RD2NF

A 2.5-inch internal SAS hard drive delivering 900 GB at 15,000 rpm with a 12 Gb/s interface for server workloads

  • 900 GB capacity stores large server datasets
  • 15 000 rpm spindle speed accelerates random I/O
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

900 GB 15 000 rpm SAS drive

The HPE 870765-B21 is a 900 GB internal hard drive spinning at 15 000 rpm with a SAS 12Gb/s interface in a 2.5 inch form factor. It is built for server workloads that demand high throughput and low latency.

Installation and common issues

The drive fits standard 2.5 inch SAS bays and connects with a single SAS data and power cable. Most problems arise when the backplane or controller does not support 12Gb/s speeds, causing the link to negotiate down or fail entirely.

Compatibility checks before ordering

Verify that your server chassis accepts 2.5 inch SAS drives and that the RAID controller or HBA lists 12Gb/s SAS support. Confirm the drive cage provides the correct connector spacing and that firmware on the controller is current for this capacity.

Istaknuto

  • 900 GB capacity stores large server datasets
  • 15 000 rpm spindle speed accelerates random I/O
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

Specifikacije

BrandHPE

Pitanja o ovom artiklu

How can I verify the 15000 rpm spindle speed is active after installing the drive?

The drive reports its spindle speed through SMART data; use a tool such as smartctl or the server BIOS to confirm the 15000 rpm value is present.

Does the 2.5" SAS drive ship with a mounting tray or caddy for server bays?

The drive is supplied as a bare 2.5" unit; a compatible hot-plug tray or caddy for the specific server chassis must be purchased separately.

Which capacity should I choose if I need the 900 GB model with a 12Gb/s SAS interface?

The part number 870765-B21 identifies the 900 GB capacity with 12Gb/s SAS; select this exact MPN to match those specifications.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.