Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2.5-inch SAS hard drive with green circuit board visible

HPE

HPE 870765-B21 900 GB 15000 rpm 2.5" SAS 12Gb/s internal hard drive

SKU CH-5GGW-RD2NF

A 2.5-inch internal SAS hard drive delivering 900 GB at 15,000 rpm with a 12 Gb/s interface for server workloads

  • 900 GB capacity stores large server datasets
  • 15 000 rpm spindle speed accelerates random I/O
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

900 GB 15 000 rpm SAS drive

The HPE 870765-B21 is a 900 GB internal hard drive spinning at 15 000 rpm with a SAS 12Gb/s interface in a 2.5 inch form factor. It is built for server workloads that demand high throughput and low latency.

Installation and common issues

The drive fits standard 2.5 inch SAS bays and connects with a single SAS data and power cable. Most problems arise when the backplane or controller does not support 12Gb/s speeds, causing the link to negotiate down or fail entirely.

Compatibility checks before ordering

Verify that your server chassis accepts 2.5 inch SAS drives and that the RAID controller or HBA lists 12Gb/s SAS support. Confirm the drive cage provides the correct connector spacing and that firmware on the controller is current for this capacity.

Helstu kostir

  • 900 GB capacity stores large server datasets
  • 15 000 rpm spindle speed accelerates random I/O
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

Tæknilýsing

BrandHPE

Spurningar um þessa vöru

How can I verify the 15000 rpm spindle speed is active after installing the drive?

The drive reports its spindle speed through SMART data; use a tool such as smartctl or the server BIOS to confirm the 15000 rpm value is present.

Does the 2.5" SAS drive ship with a mounting tray or caddy for server bays?

The drive is supplied as a bare 2.5" unit; a compatible hot-plug tray or caddy for the specific server chassis must be purchased separately.

Which capacity should I choose if I need the 900 GB model with a 12Gb/s SAS interface?

The part number 870765-B21 identifies the 900 GB capacity with 12Gb/s SAS; select this exact MPN to match those specifications.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.