Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Silver 3.5 inch hard drive in black carrier tray

HPE

HPE 872772-001 4TB 7200 RPM SATA 6.0Gb/s 3.5in internal hard drive

SKU CH-J2MD-ZBP0N MPN 872772-001

4 TB 3.5" SATA 6.0Gb/s 7200 RPM internal hard drive with hot-plug tray for HPE ProLiant DL360 Gen10 servers

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Average Latency6Gb/s
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6.0 Gb/s interface supports fast transfers
  • 5 inch form factor fits standard bays
  • Hot-pluggable carrier enables drive swaps without downtime

4 TB midline drive for ProLiant servers

This 3.5-inch HPE drive delivers 4 TB of storage on a SATA 6.0Gb/s interface with a 7200 RPM spindle. It ships with a carrier tray and features digitally signed firmware for server compatibility. The unit is designed for hot-plug installation in supported bays.

Suited for capacity-focused server arrays.

The drive fits HPE ProLiant DL360 Gen10 servers and similar platforms that accept 3.5-inch LFF hot-plug trays. It addresses bulk storage needs where sequential throughput matters more than random access speed. Buyers who need lower latency or higher random IOPS should look at solid-state alternatives.

SATA 6.0Gb/s interface with 7200 RPM spindle

The single specification that determines fit is the SATA 6.0Gb/s interface combined with a 7200 RPM rotational speed. This pairing fixes the maximum sustained transfer rate and average latency for the platform. Verify the server backplane supports SATA 6.0Gb/s and 3.5-inch hot-plug carriers before purchase.

Istaknuto

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6.0 Gb/s interface supports fast transfers
  • 5 inch form factor fits standard bays
  • Hot-pluggable carrier enables drive swaps without downtime

Specifikacije

BrandHPE
Model872772-001
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"
Težina pošiljke0.91 kg
Dimenzije pakiranja272 × 218 × 142 mm

Pitanja o ovom artiklu

Does the 7200 RPM spindle or the SATA 6.0Gb/s interface limit sustained throughput first?

The SATA 6.0Gb/s interface caps burst transfer, while the 7200 RPM platters determine sustained sequential speed; under heavy streaming workloads the interface ceiling is reached before the mechanical limit.

What noise, heat or power impact should I expect when the drive runs continuously in a ProLiant DL360 Gen10?

At 7200 RPM the drive produces typical midline acoustic levels and heat output for a 3.5" SATA disk; the server chassis airflow and hot-plug carrier are designed to manage both during all-day operation.

Which component of the 872772-001 is most likely to need replacement after extended service?

The mechanical spindle and actuator assembly inside the sealed helium-free enclosure are the primary wear items; the digitally signed firmware and hot-plug carrier are solid-state and do not degrade with use.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.