Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Silver 3.5 inch hard drive in black carrier tray

HPE

HPE 872772-001 4TB 7200 RPM SATA 6.0Gb/s 3.5in internal hard drive

SKU CH-J2MD-ZBP0N MPN 872772-001

4 TB 3.5" SATA 6.0Gb/s 7200 RPM internal hard drive with hot-plug tray for HPE ProLiant DL360 Gen10 servers

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Average Latency6Gb/s
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6.0 Gb/s interface supports fast transfers
  • 5 inch form factor fits standard bays
  • Hot-pluggable carrier enables drive swaps without downtime

4 TB midline drive for ProLiant servers

This 3.5-inch HPE drive delivers 4 TB of storage on a SATA 6.0Gb/s interface with a 7200 RPM spindle. It ships with a carrier tray and features digitally signed firmware for server compatibility. The unit is designed for hot-plug installation in supported bays.

Suited for capacity-focused server arrays.

The drive fits HPE ProLiant DL360 Gen10 servers and similar platforms that accept 3.5-inch LFF hot-plug trays. It addresses bulk storage needs where sequential throughput matters more than random access speed. Buyers who need lower latency or higher random IOPS should look at solid-state alternatives.

SATA 6.0Gb/s interface with 7200 RPM spindle

The single specification that determines fit is the SATA 6.0Gb/s interface combined with a 7200 RPM rotational speed. This pairing fixes the maximum sustained transfer rate and average latency for the platform. Verify the server backplane supports SATA 6.0Gb/s and 3.5-inch hot-plug carriers before purchase.

Points forts

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6.0 Gb/s interface supports fast transfers
  • 5 inch form factor fits standard bays
  • Hot-pluggable carrier enables drive swaps without downtime

Caractéristiques

BrandHPE
Model872772-001
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"
Poids d’expédition0.91 kg
Dimensions du colis272 × 218 × 142 mm

Questions sur cet article

Does the 7200 RPM spindle or the SATA 6.0Gb/s interface limit sustained throughput first?

The SATA 6.0Gb/s interface caps burst transfer, while the 7200 RPM platters determine sustained sequential speed; under heavy streaming workloads the interface ceiling is reached before the mechanical limit.

What noise, heat or power impact should I expect when the drive runs continuously in a ProLiant DL360 Gen10?

At 7200 RPM the drive produces typical midline acoustic levels and heat output for a 3.5" SATA disk; the server chassis airflow and hot-plug carrier are designed to manage both during all-day operation.

Which component of the 872772-001 is most likely to need replacement after extended service?

The mechanical spindle and actuator assembly inside the sealed helium-free enclosure are the primary wear items; the digitally signed firmware and hot-plug carrier are solid-state and do not degrade with use.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.