Intel DC S3610 SSDSC2BX400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Intel
2.5-inch SATA enterprise SSD with 480 GB MLC storage, 550 MB/s read, 450 MB/s write, 84,000 read IOPS, 28,000 write IOPS, AES 256-bit encryption and power-loss data protection
The Intel DC S3610 SSDSC2BX480G401 is a 2.5-inch enterprise solid-state drive with a 480 GB capacity. It connects through a SATA III interface and uses MLC NAND built on 20 nm lithography. The drive delivers sequential reads up to 550 MBps and writes up to 450 MBps.
This SSD fits servers and storage arrays that demand high endurance and consistent low latency. Enhanced power-loss data protection, AES 256-bit hardware encryption and end-to-end data protection safeguard data integrity. Organisations needing capacities beyond 480 GB or a different interface should consider other options.
The SATA III interface sets the maximum data-transfer rate at 600 Mbps and determines host compatibility. Random performance reaches 84,000 IOPS for 4 KB reads and 28,000 IOPS for 4 KB writes. Verify that the target system provides a SATA 6 Gbps port before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3610 |
| Model | SSDSC2BX480G401 |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 450 MBps |
| 4KB Random Read | Up to 84,000 IOPS |
| 4KB Random Write | Up to 28,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 5.2W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g +/- 2g |
| Težina pošiljke | 0.48 kg |
| Dimenzije pakiranja | 203 × 152 × 114 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Yes, it requires a standard 2.5" drive bay with SATA III data and power connections to function.
The drive operates on the SATA 6Gb/s interface and will negotiate the highest link speed supported by the controller.
Run a sequential benchmark tool; results approaching 550 MBps read and 450 MBps write confirm expected operation.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?