Intel DC S3610 SSDSC2BX400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Intel
2.5-inch SATA enterprise SSD with 480 GB MLC storage, 550 MB/s read, 450 MB/s write, 84,000 read IOPS, 28,000 write IOPS, AES 256-bit encryption and power-loss data protection
The Intel DC S3610 SSDSC2BX480G401 is a 2.5-inch enterprise solid-state drive with a 480 GB capacity. It connects through a SATA III interface and uses MLC NAND built on 20 nm lithography. The drive delivers sequential reads up to 550 MBps and writes up to 450 MBps.
This SSD fits servers and storage arrays that demand high endurance and consistent low latency. Enhanced power-loss data protection, AES 256-bit hardware encryption and end-to-end data protection safeguard data integrity. Organisations needing capacities beyond 480 GB or a different interface should consider other options.
The SATA III interface sets the maximum data-transfer rate at 600 Mbps and determines host compatibility. Random performance reaches 84,000 IOPS for 4 KB reads and 28,000 IOPS for 4 KB writes. Verify that the target system provides a SATA 6 Gbps port before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3610 |
| Model | SSDSC2BX480G401 |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 450 MBps |
| 4KB Random Read | Up to 84,000 IOPS |
| 4KB Random Write | Up to 28,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 5.2W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g +/- 2g |
| Lähetyspaino | 0.48 kg |
| Pakkauksen mitat | 203 × 152 × 114 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, it requires a standard 2.5" drive bay with SATA III data and power connections to function.
The drive operates on the SATA 6Gb/s interface and will negotiate the highest link speed supported by the controller.
Run a sequential benchmark tool; results approaching 550 MBps read and 450 MBps write confirm expected operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?