Intel DC S3710 SSDSC2BA200G401 2.5" 200GB SATA enterprise SSD
- 2.5"
- 200GB
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Intel
Enterprise 2.5" SATA SSD with 1.2TB MLC capacity, 550 MB/s read, 520 MB/s write and AES 256-bit encryption
The Intel DC S3710 SSDSC2BA012T401 is a 2.5-inch enterprise solid-state drive with a 1.2TB capacity. It uses a SATA III interface and MLC memory components for consistent performance in server and storage arrays. The drive is suited for read-intensive workloads requiring high endurance and data integrity.
This drive replaces mechanical hard drives or lower-endurance SSDs in 2.5-inch SATA bays. The jump is worth it when workloads demand up to 550 MBps sequential reads, 520 MBps sequential writes, and 85,000 random read IOPS with a 2,000,000-hour MTBF. It adds AES 256-bit hardware encryption and enhanced power-loss data protection.
The SATA III interface caps maximum throughput at 6 Gbps, limiting sequential speeds to the rated 550 MBps read and 520 MBps write. Random write performance tops out at 45,000 IOPS. Latency sits at 55 µs read and 66 µs write. Active power draw reaches 6.9W within a 0°C to 70°C operating range.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA012T401 |
| Form Factor | 2.5" |
| Capacity | 1.2TB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 45,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 6.9W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 94g |
| Težina pošiljke | 0.45 kg |
| Dimenzije pakiranja | 178 × 152 × 51 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The drive uses a standard 2.5-inch form factor with SATA connectors, matching common server and laptop bays designed for this size.
Connect the SATA data and power cables, secure the drive in the bay, then enable AHCI mode in the system BIOS so the SATA III interface operates at full speed.
With a 2,000,000-hour MTBF and high-endurance MLC NAND, the SSD is rated for years of continuous operation; monitor SMART attributes for media wear or reallocated sectors to plan replacement.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?