Intel DC S3710 SSDSC2BA200G401 2.5" 200GB SATA enterprise SSD
- 2.5"
- 200GB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Intel
Enterprise 2.5" SATA SSD with 1.2TB MLC capacity, 550 MB/s read, 520 MB/s write and AES 256-bit encryption
The Intel DC S3710 SSDSC2BA012T401 is a 2.5-inch enterprise solid-state drive with a 1.2TB capacity. It uses a SATA III interface and MLC memory components for consistent performance in server and storage arrays. The drive is suited for read-intensive workloads requiring high endurance and data integrity.
This drive replaces mechanical hard drives or lower-endurance SSDs in 2.5-inch SATA bays. The jump is worth it when workloads demand up to 550 MBps sequential reads, 520 MBps sequential writes, and 85,000 random read IOPS with a 2,000,000-hour MTBF. It adds AES 256-bit hardware encryption and enhanced power-loss data protection.
The SATA III interface caps maximum throughput at 6 Gbps, limiting sequential speeds to the rated 550 MBps read and 520 MBps write. Random write performance tops out at 45,000 IOPS. Latency sits at 55 µs read and 66 µs write. Active power draw reaches 6.9W within a 0°C to 70°C operating range.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA012T401 |
| Form Factor | 2.5" |
| Capacity | 1.2TB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 45,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 6.9W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 94g |
| Lähetyspaino | 0.45 kg |
| Pakkauksen mitat | 178 × 152 × 51 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The drive uses a standard 2.5-inch form factor with SATA connectors, matching common server and laptop bays designed for this size.
Connect the SATA data and power cables, secure the drive in the bay, then enable AHCI mode in the system BIOS so the SATA III interface operates at full speed.
With a 2,000,000-hour MTBF and high-endurance MLC NAND, the SSD is rated for years of continuous operation; monitor SMART attributes for media wear or reallocated sectors to plan replacement.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?