Intel I210T1BLK network card 10/100/1000Mbps PCI-Express
- EEE 802.3 (10BASE-T…
- 10/100/1000Mbps
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Intel
Dual-port Gigabit Ethernet adapter with PCIe 2.1 x4 interface and 4.4 W power draw
Model I350T2V2
Precrtane verzije postoje, ali nisu dostupne ovdje.
The Intel I350T2V2 is a dual-port PCIe 2.1 network card delivering two RJ45 connectors at 10/100/1000Mbps. It targets servers and workstations needing reliable gigabit links for virtualised or iSCSI workloads. The card draws 4.4W and supports Energy Efficient Ethernet plus DMA Coalescing for lower power use. A low-profile bracket is included for compact chassis.
This adapter suits administrators adding gigabit ports to virtualisation hosts or iSCSI storage networks. Flexible I/O virtualisation allows up to 32 virtual ports with QoS. It is not suited for builders who need higher-speed uplinks or fibre connectivity. The PCIe 2.1 x4 interface works in x4, x8 or x16 slots without bridge chips.
The single specification that decides fit is the 4-lane PCIe 2.1 interface operable in x4, x8 and x16 slots. A physical x4 or wider slot is required; x1 slots will not accept the card. Full-height and low-profile brackets measure 12.0 cm and 7.92 cm respectively. Cable distance follows CAT5e or higher for 1000BASE-T operation.
| Brand | Intel |
|---|---|
| Model | I350-T2 |
| Part Number | I350-T2 |
| Standards | EEE 802.3 (10BASE-T, 100BASE-TX, 1000BASE-T) |
| Speed | 10/100/1000Mbps |
| Connectors | 2 x RJ45 |
| Interface | PCI-Express |
| BUS | Bus Type: PCIe 2.1 (5GT/s) Bus Width: 4-lane PCIe; operable in x4, x8, and x16 slots |
| Features | Plug and play specification support: Standard Power consumption: 4.4W Cabling: Cabling CAT3 or higher for 10BASE-T operation CAT5 or higher for 100BASE-TX operation CAT5e or higher for 1000BASE-T operation Cable Distance: Up to 100m |
| Dimensions | Length 13.54 cm (5.33 in) Width 6.89 cm (2.71 in) Full-height end bracket 12.0 cm (4.725 in) Low-profile end bracket 7.92 cm (3.117 in) |
| Težina pošiljke | 0.18 kg |
| Dimenzije pakiranja | 226 × 142 × 30 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The adapter consumes 4.4 W under typical operation, so heat output stays low even during all-day workloads.
You need Category 5e or better copper cable; Cat 5 is sufficient for 100 Mbps and Cat 3 only for 10 Mbps links.
Yes — the board uses a PCIe 2.1 x4 interface and operates in x4, x8 or x16 slots, so a 2.0 x8 slot provides full bandwidth.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?