Intel I210T1BLK network card 10/100/1000Mbps PCI-Express
- EEE 802.3 (10BASE-T…
- 10/100/1000Mbps
Intel
Dual-port Gigabit Ethernet adapter with PCIe 2.1 x4 interface and 4.4 W power draw
Model I350T2V2
被劃上刪除線的選項確實存在,但本站並無供貨。
The Intel I350T2V2 is a dual-port PCIe 2.1 network card delivering two RJ45 connectors at 10/100/1000Mbps. It targets servers and workstations needing reliable gigabit links for virtualised or iSCSI workloads. The card draws 4.4W and supports Energy Efficient Ethernet plus DMA Coalescing for lower power use. A low-profile bracket is included for compact chassis.
This adapter suits administrators adding gigabit ports to virtualisation hosts or iSCSI storage networks. Flexible I/O virtualisation allows up to 32 virtual ports with QoS. It is not suited for builders who need higher-speed uplinks or fibre connectivity. The PCIe 2.1 x4 interface works in x4, x8 or x16 slots without bridge chips.
The single specification that decides fit is the 4-lane PCIe 2.1 interface operable in x4, x8 and x16 slots. A physical x4 or wider slot is required; x1 slots will not accept the card. Full-height and low-profile brackets measure 12.0 cm and 7.92 cm respectively. Cable distance follows CAT5e or higher for 1000BASE-T operation.
| Brand | Intel |
|---|---|
| Model | I350-T2 |
| Part Number | I350-T2 |
| Standards | EEE 802.3 (10BASE-T, 100BASE-TX, 1000BASE-T) |
| Speed | 10/100/1000Mbps |
| Connectors | 2 x RJ45 |
| Interface | PCI-Express |
| BUS | Bus Type: PCIe 2.1 (5GT/s) Bus Width: 4-lane PCIe; operable in x4, x8, and x16 slots |
| Features | Plug and play specification support: Standard Power consumption: 4.4W Cabling: Cabling CAT3 or higher for 10BASE-T operation CAT5 or higher for 100BASE-TX operation CAT5e or higher for 1000BASE-T operation Cable Distance: Up to 100m |
| Dimensions | Length 13.54 cm (5.33 in) Width 6.89 cm (2.71 in) Full-height end bracket 12.0 cm (4.725 in) Low-profile end bracket 7.92 cm (3.117 in) |
| 出貨重量 | 0.18 kg |
| 包裝尺寸 | 226 × 142 × 30 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The adapter consumes 4.4 W under typical operation, so heat output stays low even during all-day workloads.
You need Category 5e or better copper cable; Cat 5 is sufficient for 100 Mbps and Cat 3 only for 10 Mbps links.
Yes — the board uses a PCIe 2.1 x4 interface and operates in x4, x8 or x16 slots, so a 2.0 x8 slot provides full bandwidth.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?