Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Small green circuit board with a 16x2 character LCD showing white text on blue background and a four pin header

LORDWORLD

LORDWORLD LCD1602 I2C Display Module 16x2 White Blue 3.3V 5V

SKU CH-B8KJ-PTTRM

A 16x2 character LCD with I2C interface needs only two signal pins and runs on 3.3V or 5V for Raspberry Pi, ESP32 and Arduino projects

  • 16x2 character display with white text on blue background
  • I2C interface uses only two signal pins
  • AiP31068 controller supports 3.3 V and 5 V operation
  • Compatible with Raspberry Pi, Jetson Nano, ESP32 and Arduino
  • Online manual and example code included for quick setup

Compact 16x2 I2C Character Display

This LORDWORLD module uses an LCD1602 panel with an AiP31068 controller and a built-in I2C interface that needs only two signal lines. It operates at either 3.3 V or 5 V and shows 16 characters by 2 rows with a white-on-blue background. The board is designed for direct connection to popular development platforms.

Suited for GPIO-limited boards.

Makers using Raspberry Pi, Jetson Nano, ESP32 or Arduino boards that have few free pins will benefit from the two-wire interface. Projects needing colour graphics, touch input, or higher character counts should look at alternative display types.

Online examples speed up first integration

The supplier provides code samples and a manual covering Raspberry Pi, Jetson Nano, ESP32 and Arduino environments. These resources let developers initialise the display and print text without writing low-level driver code from scratch.

Istaknuto

  • 16x2 character display with white text on blue background
  • I2C interface uses only two signal pins
  • AiP31068 controller supports 3.3 V and 5 V operation
  • Compatible with Raspberry Pi, Jetson Nano, ESP32 and Arduino
  • Online manual and example code included for quick setup

Specifikacije

BrandLORDWORLD

Pitanja o ovom artiklu

Which development board do I need to provide the I2C bus and 3.3 V or 5 V supply for this module?

The module works with any board that exposes an I2C bus at 3.3 V or 5 V, including Raspberry Pi 4B, 3B+, Zero W, Pico, Jetson Nano or ESP32.

Will the AiP31068 controller on this display work with 5 V logic on my older Arduino Uno?

Yes, the AiP31068 controller is compatible with both 3.3 V and 5 V operating voltage, so it can be driven directly from a 5 V Arduino Uno.

How can I verify the LCD1602 panel and I2C interface are functioning after wiring?

Run the supplied example sketch for your platform; the 16×2 white-on-blue panel should show the test text and the I2C address scan should list the controller.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.