Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Enclosed metal power supply unit with terminal connections

Mean Well

Mean Well NES-100-24 108W 24V 4.5A power supply

SKU CH-KAEF-R6HX1

Enclosed 108 W AC-DC unit delivering 24 V at 4.5 A for low-power systems

  • TypeAT
  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Enclosed 108 W AT power supply

This Mean Well NES-100-24 is an enclosed AC-DC switching unit that delivers 108 W at 24 V and 4.5 A. It is built for equipment that requires a single regulated 24 V rail in an AT form factor.

Suits 24 V industrial or automation gear.

The supply suits machines, controllers or test rigs that need a steady 24 V 4.5 A source. It is not designed for desktop PC motherboards, GPU power or any load that expects ATX connectors or multiple voltage rails.

108 W continuous at 24 V

The unit provides up to 108 W continuously on the 24 V output, giving headroom for motors, sensors or PLCs drawing up to 4.5 A. Loads above 108 W or currents beyond 4.5 A will exceed its rating and require a larger supply.

Istaknuto

  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Specifikacije

TypeAT

Pitanja o ovom artiklu

What AC input voltage range does the NES-100-24 require to operate?

The NES-100-24 is an AT type power supply designed for standard AC mains input. Ensure your local mains voltage matches the unit's rated input range before connecting it.

Can the NES-100-24 replace an older 12 V power supply in the same chassis?

No, the NES-100-24 delivers a fixed 24 V output at 4.5 A. It cannot power equipment that requires a 12 V rail, so verify your load voltage before swapping units.

How do I confirm the NES-100-24 is delivering its rated 108 W after installation?

Measure the output terminals with a multimeter under load; you should read approximately 24 V while the connected equipment draws up to 4.5 A, confirming the 108 W rating.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.