Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Enclosed metal power supply unit with terminal connections

Mean Well

Mean Well NES-100-24 108W 24V 4.5A power supply

SKU CH-KAEF-R6HX1

Enclosed 108 W AC-DC unit delivering 24 V at 4.5 A for low-power systems

  • TypeAT
  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Enclosed 108 W AT power supply

This Mean Well NES-100-24 is an enclosed AC-DC switching unit that delivers 108 W at 24 V and 4.5 A. It is built for equipment that requires a single regulated 24 V rail in an AT form factor.

Suits 24 V industrial or automation gear.

The supply suits machines, controllers or test rigs that need a steady 24 V 4.5 A source. It is not designed for desktop PC motherboards, GPU power or any load that expects ATX connectors or multiple voltage rails.

108 W continuous at 24 V

The unit provides up to 108 W continuously on the 24 V output, giving headroom for motors, sensors or PLCs drawing up to 4.5 A. Loads above 108 W or currents beyond 4.5 A will exceed its rating and require a larger supply.

Fordele

  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Specifikationer

TypeAT

Spørgsmål om denne vare

What AC input voltage range does the NES-100-24 require to operate?

The NES-100-24 is an AT type power supply designed for standard AC mains input. Ensure your local mains voltage matches the unit's rated input range before connecting it.

Can the NES-100-24 replace an older 12 V power supply in the same chassis?

No, the NES-100-24 delivers a fixed 24 V output at 4.5 A. It cannot power equipment that requires a 12 V rail, so verify your load voltage before swapping units.

How do I confirm the NES-100-24 is delivering its rated 108 W after installation?

Measure the output terminals with a multimeter under load; you should read approximately 24 V while the connected equipment draws up to 4.5 A, confirming the 108 W rating.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.