Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Compact rectangular power module, matte black PCB with gold connectors, 155 by 35 by 20 millimetres

myVolts

myVolts Fanless ATX Power Module 16-24VDC 155x35x20mm

SKU CH-83ZV-CC06H

A fanless ATX power module accepting 16-24 VDC input and delivering 3.3 V, 5 V and 5 VSB rails with short-circuit and over-voltage protection

  • TypeAT
  • Fanless design keeps the system completely silent
  • High-quality solid capacitors on the PCBA deliver long service life
  • Tailored for mini-ITX motherboards with 24-pin ATX and 12 V AUX outputs
  • Over-voltage protection shuts the output at 1.5× rated voltage
  • circuit protection closes the output instantly on a fault

Fanless ATX Power Module

The myVolts Fanless ATX Power Module converts a 16 to 24 VDC input into standard ATX rails for mini ITX motherboards. It measures 155 by 35 by 20 millimetres and operates without a fan for completely silent running. Industrial-grade solid capacitors on the PCB are chosen for long service life.

Input range and protection limits

The module accepts 16 to 24 VDC and draws up to 12.0 A at 19 VDC with a surge rating of 12.0 A maximum. Over-voltage protection triggers at 1.5 times the rated output voltage, while short-circuit protection shuts the output down immediately. Typical efficiency is 85 percent or higher across the operating range.

Replaces noisy ATX PSUs in space-constrained builds

This unit replaces a conventional fan-cooled ATX supply where silence and a thin 20-millimetre profile are required. The jump is worthwhile for builders who need a compact DC-to-ATX solution with robust protection circuits. It is not suited for systems that demand higher peak currents than the 10.0 A on the 3.3 V rail or 6.0 A on the 5 V rail.

Istaknuto

  • Fanless design keeps the system completely silent
  • High-quality solid capacitors on the PCBA deliver long service life
  • Tailored for mini-ITX motherboards with 24-pin ATX and 12 V AUX outputs
  • Over-voltage protection shuts the output at 1.5× rated voltage
  • circuit protection closes the output instantly on a fault

Specifikacije

TypeAT

Pitanja o ovom artiklu

Which input voltage range should I match to my DC source?

The module accepts 16 VDC to 24 VDC input; typical draw is 12.0 A at 19 VDC with a 12.0 A surge limit at the same voltage.

What 3.3 V rail current can I expect under load?

The +3.30 V output delivers a typical 8.0 A and peaks at 10.0 A with ripple kept to 50 mV.

How does the 24-pin ATX connector limit the power I can draw?

The unit provides ATX-standard rails — +3.30 V up to 10.0 A peak, +5.00 V up to 6.0 A peak and +5.00 VSB up to 2.5 A peak — all within the 85 % efficiency rating.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.