Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact rectangular power module, matte black PCB with gold connectors, 155 by 35 by 20 millimetres

myVolts

myVolts Fanless ATX Power Module 16-24VDC 155x35x20mm

SKU CH-83ZV-CC06H

A fanless ATX power module accepting 16-24 VDC input and delivering 3.3 V, 5 V and 5 VSB rails with short-circuit and over-voltage protection

  • TypeAT
  • Fanless design keeps the system completely silent
  • High-quality solid capacitors on the PCBA deliver long service life
  • Tailored for mini-ITX motherboards with 24-pin ATX and 12 V AUX outputs
  • Over-voltage protection shuts the output at 1.5× rated voltage
  • circuit protection closes the output instantly on a fault

Fanless ATX Power Module

The myVolts Fanless ATX Power Module converts a 16 to 24 VDC input into standard ATX rails for mini ITX motherboards. It measures 155 by 35 by 20 millimetres and operates without a fan for completely silent running. Industrial-grade solid capacitors on the PCB are chosen for long service life.

Input range and protection limits

The module accepts 16 to 24 VDC and draws up to 12.0 A at 19 VDC with a surge rating of 12.0 A maximum. Over-voltage protection triggers at 1.5 times the rated output voltage, while short-circuit protection shuts the output down immediately. Typical efficiency is 85 percent or higher across the operating range.

Replaces noisy ATX PSUs in space-constrained builds

This unit replaces a conventional fan-cooled ATX supply where silence and a thin 20-millimetre profile are required. The jump is worthwhile for builders who need a compact DC-to-ATX solution with robust protection circuits. It is not suited for systems that demand higher peak currents than the 10.0 A on the 3.3 V rail or 6.0 A on the 5 V rail.

Kohokohdat

  • Fanless design keeps the system completely silent
  • High-quality solid capacitors on the PCBA deliver long service life
  • Tailored for mini-ITX motherboards with 24-pin ATX and 12 V AUX outputs
  • Over-voltage protection shuts the output at 1.5× rated voltage
  • circuit protection closes the output instantly on a fault

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Which input voltage range should I match to my DC source?

The module accepts 16 VDC to 24 VDC input; typical draw is 12.0 A at 19 VDC with a 12.0 A surge limit at the same voltage.

What 3.3 V rail current can I expect under load?

The +3.30 V output delivers a typical 8.0 A and peaks at 10.0 A with ripple kept to 50 mV.

How does the 24-pin ATX connector limit the power I can draw?

The unit provides ATX-standard rails — +3.30 V up to 10.0 A peak, +5.00 V up to 6.0 A peak and +5.00 VSB up to 2.5 A peak — all within the 85 % efficiency rating.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.