BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276635BTC
Na zalihi
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-PIN SODIMM POSIFLEX ZT-3715E memory upgrade
16GB DDR4 3200 CL22 SODIMM memory upgrade for POSIFLEX ZT-3715E terminal
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200 SODIMM boosts POS terminal responsiveness
- CL22 timing and 1.2V operation ensure stable POSIFLEX ZT-3715E performance
- 2Rx8 rank with major OEM chips delivers reliable memory throughput
- 260-pin non-ECC unbuffered design matches original POS system requirements
- PC4-25600 speed rating supports demanding point-of-sale workloads
System-Specific POS Terminal Memory
This NEMIX RAM module delivers 16GB of DDR4 3200 memory built specifically for the Posiflex ZT-3715E Haydn ZT Series point-of-sale terminal. It operates at CL22 latency with a standard 1.20V voltage and uses a 2Rx8 rank configuration on a 260-pin SODIMM form factor. The non-ECC unbuffered design ensures direct compatibility with the target system.
Suited for single-slot upgrades on supported
Technicians maintaining Posiflex ZT-3715E terminals can install this module to restore or expand system memory capacity. It is not intended for desktop motherboards, laptops, or servers that require different pin layouts, voltages, or error-correcting code functionality. Buyers needing ECC registered memory or dual-channel kits should look elsewhere.
260-pin SODIMM form factor decides fit
The physical 260-pin DDR4 SODIMM interface is the single specification that determines whether this module fits the target machine. Only systems accepting this exact pin count, voltage, and unbuffered signalling will recognise the memory. Verify the service manual for the Posiflex ZT-3715E before ordering.
Istaknuto
- 16GB DDR4 3200 SODIMM boosts POS terminal responsiveness
- CL22 timing and 1.2V operation ensure stable POSIFLEX ZT-3715E performance
- 2Rx8 rank with major OEM chips delivers reliable memory throughput
- 260-pin non-ECC unbuffered design matches original POS system requirements
- PC4-25600 speed rating supports demanding point-of-sale workloads
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Pitanja o ovom artiklu
Should I choose the single 16 GB module or add a second stick for dual-channel?
The kit is a single 16 GB DDR4 3200 SODIMM. If the POSIFLEX ZT-3715E has two slots, adding an identical module will enable dual-channel bandwidth.
What does the 3200 MT/s rating deliver inside the POSIFLEX ZT-3715E?
The module runs at 3200 MT/s with CL22 latency at 1.2 V, providing the maximum JEDEC-standard throughput the terminal's memory controller supports.
Does the 260-pin DDR4 SODIMM interface limit speed or capacity in this terminal?
The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal without bottleneck; capacity is limited to 16 GB per slot by the module's 2Rx8 organisation.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279209BTC
Na zalihi
