我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-PIN SODIMM POSIFLEX ZT-3715E memory upgrade

SKU CH-KPRM-RDY7T

16GB DDR4 3200 CL22 SODIMM memory upgrade for POSIFLEX ZT-3715E terminal

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 SODIMM boosts POS terminal responsiveness
  • CL22 timing and 1.2V operation ensure stable POSIFLEX ZT-3715E performance
  • 2Rx8 rank with major OEM chips delivers reliable memory throughput
  • 260-pin non-ECC unbuffered design matches original POS system requirements
  • PC4-25600 speed rating supports demanding point-of-sale workloads

System-Specific POS Terminal Memory

This NEMIX RAM module delivers 16GB of DDR4 3200 memory built specifically for the Posiflex ZT-3715E Haydn ZT Series point-of-sale terminal. It operates at CL22 latency with a standard 1.20V voltage and uses a 2Rx8 rank configuration on a 260-pin SODIMM form factor. The non-ECC unbuffered design ensures direct compatibility with the target system.

Suited for single-slot upgrades on supported

Technicians maintaining Posiflex ZT-3715E terminals can install this module to restore or expand system memory capacity. It is not intended for desktop motherboards, laptops, or servers that require different pin layouts, voltages, or error-correcting code functionality. Buyers needing ECC registered memory or dual-channel kits should look elsewhere.

260-pin SODIMM form factor decides fit

The physical 260-pin DDR4 SODIMM interface is the single specification that determines whether this module fits the target machine. Only systems accepting this exact pin count, voltage, and unbuffered signalling will recognise the memory. Verify the service manual for the Posiflex ZT-3715E before ordering.

商品特色

  • 16GB DDR4 3200 SODIMM boosts POS terminal responsiveness
  • CL22 timing and 1.2V operation ensure stable POSIFLEX ZT-3715E performance
  • 2Rx8 rank with major OEM chips delivers reliable memory throughput
  • 260-pin non-ECC unbuffered design matches original POS system requirements
  • PC4-25600 speed rating supports demanding point-of-sale workloads

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Should I choose the single 16 GB module or add a second stick for dual-channel?

The kit is a single 16 GB DDR4 3200 SODIMM. If the POSIFLEX ZT-3715E has two slots, adding an identical module will enable dual-channel bandwidth.

What does the 3200 MT/s rating deliver inside the POSIFLEX ZT-3715E?

The module runs at 3200 MT/s with CL22 latency at 1.2 V, providing the maximum JEDEC-standard throughput the terminal's memory controller supports.

Does the 260-pin DDR4 SODIMM interface limit speed or capacity in this terminal?

The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal without bottleneck; capacity is limited to 16 GB per slot by the module's 2Rx8 organisation.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。