Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green circuit boards with black chips, no heat spreaders, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X14SAE-F

SKU CH-3ZKA-HMV3C

A 192GB DDR5 kit of four 48GB UDIMM modules running at 5600MHz CL46 and 1.1V, validated for the Supermicro X14SAE-F motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 192GB 4X48GB

  • 192 GB total capacity across four 48 GB modules for high-density workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation matches the board's memory-controller specification exactly
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X14SAE-F slot layout
  • Built with Samsung, Micron or Hynix chips and tested at rated speed and timing

Capacity and purpose

This 192 GB kit contains four 48 GB DDR5 UDIMM modules built for the Supermicro X14SAE-F motherboard. It targets desktop builders who need the exact density and rank structure this board expects.

Decisive specification

The kit runs at DDR5 5600 with CL46 latency at 1.10 V using 2Rx8 non-ECC unbuffered chips. These parameters must match the motherboard memory controller for full-speed operation and full capacity recognition.

Installation notes

Modules are standard 288-pin UDIMMs without heat spreaders, so they seat like ordinary DIMMs. The motherboard manual should be checked for approved population order and maximum supported capacity before installation.

Istaknuto

  • 192 GB total capacity across four 48 GB modules for high-density workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation matches the board's memory-controller specification exactly
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X14SAE-F slot layout
  • Built with Samsung, Micron or Hynix chips and tested at rated speed and timing

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does the 5600 speed rating actually deliver when installed in the Supermicro X14SAE-F?

The kit runs at DDR5 5600 (PC5 44800) with CL46 latency at 1.10 V, giving the board its rated bandwidth without manual tuning.

How does the 288-pin UDIMM interface limit what this kit can do on this motherboard?

The 288-pin Unbuffered DIMM form factor matches the X14SAE-F slots exactly; it cannot accept ECC or registered modules, so this non-ECC kit is the correct type.

What physical clearance does the 48 GB module need to fit in the X14SAE-F?

Standard-height 288-pin UDIMMs with no heat spreader install directly into the board's DIMM slots, following the manual's population order for four modules.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.