저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green circuit boards with black chips, no heat spreaders, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X14SAE-F

SKU CH-3ZKA-HMV3C

A 192GB DDR5 kit of four 48GB UDIMM modules running at 5600MHz CL46 and 1.1V, validated for the Supermicro X14SAE-F motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 192GB 4X48GB

  • 192 GB total capacity across four 48 GB modules for high-density workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation matches the board's memory-controller specification exactly
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X14SAE-F slot layout
  • Built with Samsung, Micron or Hynix chips and tested at rated speed and timing

Capacity and purpose

This 192 GB kit contains four 48 GB DDR5 UDIMM modules built for the Supermicro X14SAE-F motherboard. It targets desktop builders who need the exact density and rank structure this board expects.

Decisive specification

The kit runs at DDR5 5600 with CL46 latency at 1.10 V using 2Rx8 non-ECC unbuffered chips. These parameters must match the motherboard memory controller for full-speed operation and full capacity recognition.

Installation notes

Modules are standard 288-pin UDIMMs without heat spreaders, so they seat like ordinary DIMMs. The motherboard manual should be checked for approved population order and maximum supported capacity before installation.

주요 특징

  • 192 GB total capacity across four 48 GB modules for high-density workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation matches the board's memory-controller specification exactly
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X14SAE-F slot layout
  • Built with Samsung, Micron or Hynix chips and tested at rated speed and timing

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 5600 speed rating actually deliver when installed in the Supermicro X14SAE-F?

The kit runs at DDR5 5600 (PC5 44800) with CL46 latency at 1.10 V, giving the board its rated bandwidth without manual tuning.

How does the 288-pin UDIMM interface limit what this kit can do on this motherboard?

The 288-pin Unbuffered DIMM form factor matches the X14SAE-F slots exactly; it cannot accept ECC or registered modules, so this non-ECC kit is the correct type.

What physical clearance does the 48 GB module need to fit in the X14SAE-F?

Standard-height 288-pin UDIMMs with no heat spreader install directly into the board's DIMM slots, following the manual's population order for four modules.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.