Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Sixteen green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade CSE-GS7A-000NBP3

SKU CH-7TH8-EA122 MPN CSE-GS7A-000NBP3

256GB DDR5 4800 ECC registered server memory kit with sixteen 16GB modules at CL40 and 1.1V

  • Capacity256GB (16 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity for high-density server workloads
  • DDR5 4800 MT/s speed with PC5-38400 bandwidth
  • ECC registered RDIMM ensures data integrity under load
  • 16 x 16 GB kit at 1.1 V CL40 latency
  • Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility

256GB DDR5 4800 ECC RDIMM kit

This 256GB kit contains sixteen 16GB DDR5 4800 CL40 registered ECC modules. It is built for the Supermicro SuperWorkstation SYS-751A-I and the Super X13DAI-T motherboard. The modules run at 1.1V and use a 288-pin RDIMM form factor with 1Rx8 organisation.

Simple DIMM installation with manual reference

Installation follows standard RDIMM seating in the server or workstation board. The registered buffer and ECC function require a platform that explicitly supports registered DDR5 memory. The main risk is installing these modules in a consumer board that only accepts unbuffered non-ECC DIMMs, which will prevent boot.

DDR5 4800 registered ECC platform limits

The DDR5 4800 interface delivers PC5-38400 bandwidth, but total capacity and speed depend on the memory controller in the Supermicro system. Registered ECC modules cannot be mixed with unbuffered DIMMs, and the platform must validate the 1Rx8 rank configuration at CL40 latency. Exceeding the board's qualified vendor list or maximum supported capacity per channel will cause instability.

Istaknuto

  • 256 GB total capacity for high-density server workloads
  • DDR5 4800 MT/s speed with PC5-38400 bandwidth
  • ECC registered RDIMM ensures data integrity under load
  • 16 x 16 GB kit at 1.1 V CL40 latency
  • Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Pitanja o ovom artiklu

How can I confirm the 256GB kit is running at DDR5 4800 CL40 after installation?

Check the BIOS memory information screen; it should show 256GB total, 4800 MT/s data rate, and CL40 latency timings for each of the 16 modules.

What does the package contain and is anything else required for the SuperMicro SYS-751A-I?

The box includes sixteen 16GB DDR5 4800 ECC RDIMM modules; no additional parts are needed for the listed SuperMicro workstation.

Should I choose the 16x16GB CL40 kit or a different capacity for the X13DAI-T motherboard?

The 16x16GB CL40 kit fills all slots for 256GB total; select it when the workload needs maximum registered ECC capacity at 4800 MT/s.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.