SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497677BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade CSE-GS7A-000NBP3
256GB DDR5 4800 ECC registered server memory kit with sixteen 16GB modules at CL40 and 1.1V
- Capacity256GB (16 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity for high-density server workloads
- DDR5 4800 MT/s speed with PC5-38400 bandwidth
- ECC registered RDIMM ensures data integrity under load
- 16 x 16 GB kit at 1.1 V CL40 latency
- Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility
256GB DDR5 4800 ECC RDIMM kit
This 256GB kit contains sixteen 16GB DDR5 4800 CL40 registered ECC modules. It is built for the Supermicro SuperWorkstation SYS-751A-I and the Super X13DAI-T motherboard. The modules run at 1.1V and use a 288-pin RDIMM form factor with 1Rx8 organisation.
Simple DIMM installation with manual reference
Installation follows standard RDIMM seating in the server or workstation board. The registered buffer and ECC function require a platform that explicitly supports registered DDR5 memory. The main risk is installing these modules in a consumer board that only accepts unbuffered non-ECC DIMMs, which will prevent boot.
DDR5 4800 registered ECC platform limits
The DDR5 4800 interface delivers PC5-38400 bandwidth, but total capacity and speed depend on the memory controller in the Supermicro system. Registered ECC modules cannot be mixed with unbuffered DIMMs, and the platform must validate the 1Rx8 rank configuration at CL40 latency. Exceeding the board's qualified vendor list or maximum supported capacity per channel will cause instability.
จุดเด่น
- 256 GB total capacity for high-density server workloads
- DDR5 4800 MT/s speed with PC5-38400 bandwidth
- ECC registered RDIMM ensures data integrity under load
- 16 x 16 GB kit at 1.1 V CL40 latency
- Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
คำถามเกี่ยวกับสินค้านี้
How can I confirm the 256GB kit is running at DDR5 4800 CL40 after installation?
Check the BIOS memory information screen; it should show 256GB total, 4800 MT/s data rate, and CL40 latency timings for each of the 16 modules.
What does the package contain and is anything else required for the SuperMicro SYS-751A-I?
The box includes sixteen 16GB DDR5 4800 ECC RDIMM modules; no additional parts are needed for the listed SuperMicro workstation.
Should I choose the 16x16GB CL40 kit or a different capacity for the X13DAI-T motherboard?
The 16x16GB CL40 kit fills all slots for 256GB total; select it when the workload needs maximum registered ECC capacity at 4800 MT/s.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
US$74.99
0.00095208BTC
มีสินค้า