NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13SSH
A 32GB dual-channel DDR5 kit of two 16GB registered ECC RDIMMs running at 5600MHz CL46 1.1V, validated for the Supermicro H13SSH motherboard
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 32 GB DDR5 kit runs at rated 5600 MT/s with exact CL46 timing
- Registered ECC architecture corrects single-bit errors for production stability
- 1Rx8 1.1 V modules match Supermicro H13SSH memory-controller expectations
- 288-pin RDIMM form factor fits the board's required slot type
- Two 16 GB modules deliver full 32 GB capacity per channel
Exact-match DDR5 upgrade for Supermicro H13SSH
This 32 GB kit delivers two 16 GB DDR5 5600 CL46 registered ECC RDIMMs at 1.1 V. The modules match the rank, voltage and timing the H13SSH memory controller expects so the board recognises the full capacity and runs at the rated 5600 MT/s speed.
Capacity and headroom
The 32 GB total provides ample room for virtualisation hosts, database workloads and multi-tenant containers running on a single-socket server. Workloads that scale beyond 32 GB or require higher memory bandwidth than PC5-44800 will exceed this kit's limits.
Registered ECC stability
Registered buffering offloads the memory controller, allowing every populated slot to operate at full capacity, while on-die ECC corrects single-bit errors before they cause silent data corruption or unplanned reboots. The kit includes only the two RDIMMs; no heat spreaders, cables or software utilities are bundled.
Istaknuto
- 32 GB DDR5 kit runs at rated 5600 MT/s with exact CL46 timing
- Registered ECC architecture corrects single-bit errors for production stability
- 1Rx8 1.1 V modules match Supermicro H13SSH memory-controller expectations
- 288-pin RDIMM form factor fits the board's required slot type
- Two 16 GB modules deliver full 32 GB capacity per channel
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Pitanja o ovom artiklu
Will these 288-pin DDR5 5600 RDIMMs install in the remaining slots of my Supermicro H13SSH without changing BIOS settings?
The kit matches the H13SSH memory-population rules; the registered ECC design lets every populated slot run at the rated 5600 MT/s speed once the DIMMs are seated in the correct order.
How can I confirm the 1Rx8 modules are running at CL46 and 1.10 V after installation?
Check the BIOS memory-info screen or run dmidecode — it will report DDR5-5600, CAS 46 and 1.10 V for each 16 GB rank.
Does the MR44800-618K2 box contain only the two 16 GB RDIMMs or are any cables or brackets included?
The package holds the 32 GB (2 × 16 GB) DDR5 5600 ECC RDIMM kit and nothing else.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.



