We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13SSH

SKU CH-HHZH-2S6KX

A 32GB dual-channel DDR5 kit of two 16GB registered ECC RDIMMs running at 5600MHz CL46 1.1V, validated for the Supermicro H13SSH motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB DDR5 kit runs at rated 5600 MT/s with exact CL46 timing
  • Registered ECC architecture corrects single-bit errors for production stability
  • 1Rx8 1.1 V modules match Supermicro H13SSH memory-controller expectations
  • 288-pin RDIMM form factor fits the board's required slot type
  • Two 16 GB modules deliver full 32 GB capacity per channel

Exact-match DDR5 upgrade for Supermicro H13SSH

This 32 GB kit delivers two 16 GB DDR5 5600 CL46 registered ECC RDIMMs at 1.1 V. The modules match the rank, voltage and timing the H13SSH memory controller expects so the board recognises the full capacity and runs at the rated 5600 MT/s speed.

Capacity and headroom

The 32 GB total provides ample room for virtualisation hosts, database workloads and multi-tenant containers running on a single-socket server. Workloads that scale beyond 32 GB or require higher memory bandwidth than PC5-44800 will exceed this kit's limits.

Registered ECC stability

Registered buffering offloads the memory controller, allowing every populated slot to operate at full capacity, while on-die ECC corrects single-bit errors before they cause silent data corruption or unplanned reboots. The kit includes only the two RDIMMs; no heat spreaders, cables or software utilities are bundled.

Highlights

  • 32 GB DDR5 kit runs at rated 5600 MT/s with exact CL46 timing
  • Registered ECC architecture corrects single-bit errors for production stability
  • 1Rx8 1.1 V modules match Supermicro H13SSH memory-controller expectations
  • 288-pin RDIMM form factor fits the board's required slot type
  • Two 16 GB modules deliver full 32 GB capacity per channel

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will these 288-pin DDR5 5600 RDIMMs install in the remaining slots of my Supermicro H13SSH without changing BIOS settings?

The kit matches the H13SSH memory-population rules; the registered ECC design lets every populated slot run at the rated 5600 MT/s speed once the DIMMs are seated in the correct order.

How can I confirm the 1Rx8 modules are running at CL46 and 1.10 V after installation?

Check the BIOS memory-info screen or run dmidecode — it will report DDR5-5600, CAS 46 and 1.10 V for each 16 GB rank.

Does the MR44800-618K2 box contain only the two 16 GB RDIMMs or are any cables or brackets included?

The package holds the 32 GB (2 × 16 GB) DDR5 5600 ECC RDIMM kit and nothing else.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.